bodazappa

Ok, I got everything installed and had a question about the halo wiring aspect. I didn't replace the side lamp and used the socket for the halo wires. The left side worked but the right didn't. I am assuming that right side is bunk so my question is: is it worth it to try and take the headlamp apart and try and fix the halo or just say forget like I have so far, disconnected the one that worked and just left it as is without either side working?

zman

Are you sure that you used the "parking light" wires. Now i believe that there are 3 wires you can choose from, power from turn signal, power for parking light (which is the one you want), and ground (also the one you want). Try turning on the right turn signal to see if you hooked the halo wires up to the turn signal.

Ok i took a picture of my set up. The 2 red and 2 white wires are coming from the halos. The red hooks up to red/black wire (parking light). The white hooks up to the black wire (ground). I used wire taps that you can get from autozone. This way when i turn the parking lights on the halos come on. Hope this helps.

bodazappa

There are only 2 wires coming from the halos, 1 red and 1 black. And I originally had it hooked to the parking light but the one side didn't work so I think that the one halo is bad Ah it is frustrating!

Solscud007

not to poop on your parade But I have heard that Halos have a tendency to crap out real fast.

handa

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Solscud007 &raquo;</TD></TR><TR><TD CLASS="quote">not to poop on your parade But I have heard that Halos have a tendency to crap out real fast.</TD></TR></TABLE>

when i used to have it, my bulbs keep blowing up and fogged up inside. got my jdm ones and loveed it so far!!! stick with oem!

back to the question, i believe there are 2 wires from the halo angel eyes (red and white?). i simply hook them up with my corner wires (red and black):

red to red
white to black (i believe this was ground)

good luck!