FS: 1997 Integra Type R-Florida
Hey guys, its official. the 1997 type r is for sale. this will make a great project some someone to finish, i dont have the time or the resources anymore. i need to get some pics up this weekend but here is the post. car has 67,000 miles.
as far as body damage it needs a new front bumper, there some dents on the driver side door and the spoiler was stolen by someone trying to tear in off the car.
as far as the motor is concerned i would consider it built. completely built head including skunk stg 2 cams, and dual valve springs, ferrea valves, skunk cam gears, slight porting of the IM and exhaust manifold. bottom end is waiting to be bored for new pistons, gsr polished crank, acl bearings, stock rods, ACT HDSS clutch. Bolt ons are JDM 4-1 header, injen CAI
fuel system includes a Jackson racing 255lph fuel pump, B&M fpr, rc 310cc injectors, vafc, chipped p28 with conversion harness.
i might be missing a few things, i do also have most of the stock parts. currently the car is sitting in a shop in orlando for a couple reasons. first, the bottom end was just built, literally 0 miles on it and when the car was started the was quite a bit of white smoke from the exhuast. it was determined that the valve guides were shot so i had them replaced and a new valves job done on the head. following that there was some metal shaving found in the oil pan, the problem was the machine shop overbored the block, that is why its waiting for new pistons. that is pretty much the situation, im asking $9,500. you can email me at andrewasf77@yahoo.com, post here or pm me with any questions.
if a mod will pm me i will furnish the complete vin #
-andy
edit: reduced price!!!
Modified by andrewasf77 at 5:08 PM 6/27/2004
as far as body damage it needs a new front bumper, there some dents on the driver side door and the spoiler was stolen by someone trying to tear in off the car.
as far as the motor is concerned i would consider it built. completely built head including skunk stg 2 cams, and dual valve springs, ferrea valves, skunk cam gears, slight porting of the IM and exhaust manifold. bottom end is waiting to be bored for new pistons, gsr polished crank, acl bearings, stock rods, ACT HDSS clutch. Bolt ons are JDM 4-1 header, injen CAI
fuel system includes a Jackson racing 255lph fuel pump, B&M fpr, rc 310cc injectors, vafc, chipped p28 with conversion harness.
i might be missing a few things, i do also have most of the stock parts. currently the car is sitting in a shop in orlando for a couple reasons. first, the bottom end was just built, literally 0 miles on it and when the car was started the was quite a bit of white smoke from the exhuast. it was determined that the valve guides were shot so i had them replaced and a new valves job done on the head. following that there was some metal shaving found in the oil pan, the problem was the machine shop overbored the block, that is why its waiting for new pistons. that is pretty much the situation, im asking $9,500. you can email me at andrewasf77@yahoo.com, post here or pm me with any questions.
if a mod will pm me i will furnish the complete vin #
-andy
edit: reduced price!!!
Modified by andrewasf77 at 5:08 PM 6/27/2004
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H22aInside »</TD></TR><TR><TD CLASS="quote">i am in the market for a R, and will be in FL jun18-28.
so 10,500 is the cost for the R running, or am i going to havet to shell out extra cash to even get the car running right?</TD></TR></TABLE>
for 10,500 the car will need a set of 82mm pistons installed for it to run, but i am open to offers as well.
so 10,500 is the cost for the R running, or am i going to havet to shell out extra cash to even get the car running right?</TD></TR></TABLE>
for 10,500 the car will need a set of 82mm pistons installed for it to run, but i am open to offers as well.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ACTEG »</TD></TR><TR><TD CLASS="quote">email pics and vin# to scwresume@yahoo.com
thx</TD></TR></TABLE>
i am taking some pics this afternoon, then i will email some to you and post them in this thread
thx</TD></TR></TABLE>
i am taking some pics this afternoon, then i will email some to you and post them in this thread
here are some pics guys: you can see the body damage on the bumper and the driver side door. i do have a pic of the engine bay, but the motor is not in there so i didnt think it was necessary to waste space and post that one. if you guys have any questions please feel free to pm or post here. the title is clean, NOT a salvage title




these are just surface scratches, does not need a new bumper

Modified by andrewasf77 at 7:35 PM 6/4/2004




these are just surface scratches, does not need a new bumper

Modified by andrewasf77 at 7:35 PM 6/4/2004
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PRojectSi2 »</TD></TR><TR><TD CLASS="quote">Poor 97 ITR....god that is really depressing...but bump for you anyways</TD></TR></TABLE>
tell me about it, but im sure someone can restore it to its once beautiful condition. did i mention this price is negotiable?
tell me about it, but im sure someone can restore it to its once beautiful condition. did i mention this price is negotiable?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MAD ITR 55 »</TD></TR><TR><TD CLASS="quote">Nice project!I might be interested if my R sells.</TD></TR></TABLE>
yea, the nice thing about this project is that its pretty close to being done. pistons and a paint job
yea, the nice thing about this project is that its pretty close to being done. pistons and a paint job
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MAD ITR 55 »</TD></TR><TR><TD CLASS="quote">Nice project!I might be interested if my R sells.</TD></TR></TABLE>
cool, are you close to selling?
cool, are you close to selling?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by andrewasf77 »</TD></TR><TR><TD CLASS="quote">
cool, are you close to selling?</TD></TR></TABLE>
Maybe,I have one potential buyer right now
cool, are you close to selling?</TD></TR></TABLE>
Maybe,I have one potential buyer right now
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mario82686 »</TD></TR><TR><TD CLASS="quote">That has to be in the worst condition I have ever seen a ITR for sale.
</TD></TR></TABLE>
wow, i guess youre right, but at least its a clean title 97
</TD></TR></TABLE>wow, i guess youre right, but at least its a clean title 97




the front lip is cracked on it, but otherwise it's in decent shape.
