I have EVERYTHING to swap this motor into a 92-00 civic, hatch, or del sol. Including injectors, msd, new resistor box, hondata, fuel pump, fuel pressure regulator, OBD2-OBD1 conversion harness, Gator axles, Hasport mounts, shift linkage, endyn catch tank. and much more. THIS MOTOR HAS 0 MILES ON IT!!! Never been installed. I am abandoning my turbo project and going with a different car. Here is a break down of the motor.

LS block 1.8L
Golden Eagle Sleeves
New O-rings
Arias Pistons 10:1
Pauter Rods
Complete Bearing Set
Micropolished and Balanced Crank
GSR oil pump
LS water pump
New lower end Gasket Kit
New head studs
JG Intake Manifold (HUGE!!!)
72mm Erick's Racing Throttle Body
B16 HEAD
COMPLETE REV VALVETRAIN
TITANIUM VALES, VALESPRINGS, and RETAINERS
PORTED AND POLISHED
Stock B16 cams
99 GSR TRANSMISSION
Quaife LSD
Tilton Cera-Metalic Clutch
Stainless Steel lines for turbo feed and vtec

I can Supply pictures if you would like them, just catch me on AIM (SiDelSol97) or drop me an email. There is much more on and with this motor, I just cant remember everything off the top of my head. The only things you would need for the swap are a Fuel Rail and a Wiring Harness. These were stolen a while back and I did not get new ones. Please email me or msg me with any questions.

I am wanting $9000 for eveything, I have over $16K invested in all of this.

Credit card payment can be made thru PAYPAL.

Modified by SiDelSol97 at 12:46 AM 6/4/2004


Modified by SiDelSol97 at 12:48 AM 6/4/2004

 

ttt

 

tttt

 

night bump

 

Morning bump.

 

Free Bump for dallas Local!

 

Thnx man

 

Afternoon bump...

 

After afternoon bump.

 

Bump

 

tttttt

 

fyujkl

 

night bump

 

im sorry, but you spent 16K on that? just seems kinda pricey.. very pricey

 

well, price of the block, head and tranny...then PROFESSIONALLY upgrading every single piece on it...tons of aftermarket parts, and all of the pieces need to put it in the car....i dont think it is pricey for all of that.

 

Evening bump...

 

Nite bump...

 

95 Civic Coupe
B18C1 Swap
.40 over 9.8:1 JE Pistons
Crower Rods
Polished & knife Edged Crank
Full Darton Sleeves
Blitz BOV
Tial Wastegate
Full Race JG Head
SS oversized valves
Titanium retainers
Web Double Springs
Mirror polished head(RPM)
AEM cam gears
AEM Fuel Rail
850cc RC Engineering Injectors
Aeromotive 1000cc External Fuel Pump
Aeromotive external filter
Modified Fuel Tank
Braded fuel lines
Paxton FPR
DFI 7

 

how much for just the block

 

Just a tip man.. That's some serious cash... for someone with under a thousand posts and an established history as a good seller.. you wont sell it.. not to anyone with common sence anyways..

Get some pics.. http://www.we-todd-did-racing.com its free. and 16k.. for what you got.. most people can do what you did with half that

good luck

 

well also look at his signup date. I would trust him more than I would trust someone that signed up in 2003-2004. I mean take for instance my post count. I don't post much on here but look at my sign up date. Would you trust someone that had over 1,000 but yet there sign up date is 2003-2004. If he had vouches then i think it would be all good.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Crxlsturbo &raquo;</TD></TR><TR><TD CLASS="quote">well also look at his signup date. I would trust him more than I would trust someone that signed up in 2003-2004. I mean take for instance my post count. I don't post much on here but look at my sign up date. Would you trust someone that had over 1,000 but yet there sign up date is 2003-2004. If he had vouches then i think it would be all good.</TD></TR></TABLE>

Thanks, I also have an impecable eBay profile that I could refer serious people to. I can also supply vouches. Thanks for the support. I have decided though to finish my turbo project so the motor is no longer available for sale. Thanks guys.