ok i know they bolt righ tup but how do i attch my drum line to disk lines...? adn i have to keep my lower control arm from my civic b/c the jap integra arm doesnt fit righ twith my suspension its not a fork ....that ok right i could use my lower control arm of my civic on the integra arm? anyone have pictures are diagram or info to help me with the lione or anythgin i must no

 

Use your stock civic lca (it will bolt up fine w/ the integra trailing arm.
Use integra brake lines (the rubber ones...the civic hard lines are fine).

 

WTF? I though the 90-93 teggy trailing arms wouldn't go on an EG civic? I thought they were a little longer or something and caused camber problems?

 

Back from the dead, I see

yes, they go on...
ek's too

 

Yes I know its back from the dead, I purposly brought it back from the dead, because when I was looking for a rear disk swap I swear that I was told I couldn't use the trailing arms without causing camber problems. Thats why I went so much work to pull the hubs off. I'm going to be pissed if it wasen't true...

Alright, searched and found this.

lets make this easier:
Rear trailing arms off the following will fit/work
All integra 91-01
All civic 92-00
All del sol 93-97
All these parts are identical (minus the hub).
The DA integra arms do use a larger bushing (1/2" larger circumference) but bolt up exactly the same

Modified by pdiggitydogg at 6:54 PM 9/10/2004

Thats crazy. I know when I looked before someone said you had to swap the entire hub out. I'm pissed now Getting that hub off is a little bit more work.

 

Some say it does cause camber issues, some say it does not. I know and trust those that have it and say it does not.

I had DA arms bolted onto my ek, but removed while the car was still in the air because the bushings were too worn to use. After I found out about the difference in bushing size I changed the arms rather than the bushings and currently have the later gen arms on.

Either fit. Either work.

 

thanks guys so they do fitthe ek just got to use the eg lca or teg that comes with the trailing arm ..thanks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fastest &raquo;</TD></TR><TR><TD CLASS="quote">thanks guys so they do fitthe ek just got to use the eg lca or teg that comes with the trailing arm ..thanks</TD></TR></TABLE>

This run-on sentance is a little hard to follow (punctuation ownz), but it sounds like your asking a question. If that question is "can I use EG/DC rear LCAs on my EK?", then the anser is NO! 96+00 civics have longer & skinnier rear LCAs than all the others. You must retain your old EK LCAs...