<U>83mm B18B block</U>
-Benson's sleeves (83mm)
-Crower 95mm stroker crank (OEM B20A)
-Crower rods
-JE pistions (13.1 comp)
-JE rings
-OEM bearings/washers
-balanced and blueprinted
-assembled and ready to go
-OEM 83mm gasket by GE
-zero miles, never installed, everything is new

$make offer$
see more pics of the motor here: http://photos.yahoo.com/d1703



<U>81mm B18A Block</U>
-28 pinned around coolant track (like a block guard)
-stock crank
-cleand and hot tanked
-comes with oil pan, pickup, bolts, etc. (Basically everything in the pics in the link)

$300obo
see more pics of the motor here: http://photos.yahoo.com/d1703


$SOLD

Misc other stuff for sale:

90-91 integra manual OBD0 ECU $60
MSD RPM active swtich (NIB) $40
JDM right side power mirror and switch $SOLD
Del Sol DOHC cluster $SOLD
JDM fuse box $SOLD
Integra center console with JDM armrest pad $80 (on ebay now)
SFC adapter harrness OBD1 $75
Spearco Intercooler with polished ends $300
JDM ITR header heat sheilds (jet-hot coated silver) $SOLD
98-02 Accord carbonfiber hood (has a crack in it) $50
ITR LCA $75
GSR LCA (swaybar holes) $45
AEM ITR cold air intake $SOLD
94 LS complete dist (one leg cut but will include another LS housing) $50
B-series pulleys $45 each (take you pick from the photo)
Honda O2 Sensors $40 each (take you pick from the photo, almost sold out)
Skunk 2 rear sway bar for DC/EG (bar only) $SOLD
Skunk2 lower tie bar with bolts for DC/EG $SOLD
98 LS T/B complete $50
MSD 6AL $80
ACT street disc and HD pp (b-series) $150
Recaro SRD driver seat with OEM rails for DC/EG $SOLD
B-series manual starter $60

See pics here: http://photos.yahoo.com/d1703




Modified by D1703 at 6:18 AM 6/30/2004


Modified by D1703 at 8:58 PM 7/3/2004

 

up

 

what is the mileage on the clutch?

 

like 3200 miles, used for a short time

 

up

 

do you still have the B18B block with tha p30 pistons?

 

pm'd

 

yes still have everything

 

skunk 2 tie bar sold to me

 

pmed you

 

..bump


Modified by marko_think at 11:44 PM 5/31/2004

 

yup skunk2 rear tie bar is sold

 

up again

 

somebody buy

 

up

 

stock sleeves on the 81mm?

 

yup stock on both except the first block

 

what are u looking to get for the 83mm block??? what all is missing???

 

How are the Piston to wall clearances????

Is everything according to OEM Specs??? other than the Crower Specs of course, but as far as spacing is concerned...

 

oem specs, taking offer right now for it. bare short block assembled with pistons and rods.

 

up again

 

bump for a good seller
bought the skunk 2 lower bar from him , got it today

 

thanks! up

 

ad is updated!

 

up