Eg w/JDM H22 What Chip to USE on P28
Thread Starter
Junior Member
Joined: May 2004
Posts: 348
Likes: 0
From: At your Door, CA, USA
Eg w/JDM H22 What Chip to USE on P28
I have a 2001 Euro R H22a and i was just wondering... i know i can use my P28, but what chip do i have to go with... i was thinking about chipping Jun but i don't know if i have to use the P13 or if i can use my P28 to map the Jun P13... Please Help meeh out.... one thing also, is chipping better or going with Hondata... I also have the Euro R ECU, But they said i can't use it for my swap Because it's an OBD2B... is that true, or can i just buy AN ECU CONVERSION for it.... PLEASE HELP ME OUT ASAP..... THANKZ A BUNCH...
Honda-Tech Member
Joined: Oct 2000
Posts: 4,490
Likes: 2
From: GTA, ON, Canada
Re: Eg w/JDM H22 What Chip to USE on P28 (yangja)
more then you ever needed to know about chipping and tuning.
http://www.pgmfi.org/twiki/bin/view/Home/WebHome
hondata
, considering the development done by few from the board
http://www.pgmfi.org/twiki/bin/view/Home/WebHome
hondata
, considering the development done by few from the board
Joined: Aug 2003
Posts: 625
Likes: 0
From: Mad City, WI
Re: Eg w/JDM H22 What Chip to USE on P28 (eg6ajk)
you can use the p28 ecu as long as you have chipped it to run a dohc motor. i've seen this done before, and my buddy is running a h22 in his eg with the Jun prog too. you're right about running the euro r ecu. if it's an obd II then all you have to do is get a conversion for the ecu harness. you might have to wire up knock sensors too. i'm not sure. i would recommend that because w/ ecu chips and prog, they tend to run really rich air/fuel maps because these programs are intended for built, high compression. if you're motor is still stock, these fuel curves probably aren't going to do much.
Thread Starter
Junior Member
Joined: May 2004
Posts: 348
Likes: 0
From: At your Door, CA, USA
Re: Eg w/JDM H22 What Chip to USE on P28 (LudeSH)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LudeSH »</TD></TR><TR><TD CLASS="quote">Pm iH8RICERZ...I ordered to chipped p28s from him.</TD></TR></TABLE>
HOW DO I PM....
HOW DO I PM....
Thread Starter
Junior Member
Joined: May 2004
Posts: 348
Likes: 0
From: At your Door, CA, USA
Re: Eg w/JDM H22 What Chip to USE on P28 (bogus)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bogus »</TD></TR><TR><TD CLASS="quote">you can use the p28 ecu as long as you have chipped it to run a dohc motor. i've seen this done before, and my buddy is running a h22 in his eg with the Jun prog too. you're right about running the euro r ecu. if it's an obd II then all you have to do is get a conversion for the ecu harness. you might have to wire up knock sensors too. i'm not sure. i would recommend that because w/ ecu chips and prog, they tend to run really rich air/fuel maps because these programs are intended for built, high compression. if you're motor is still stock, these fuel curves probably aren't going to do much.</TD></TR></TABLE>
THANKS FOR THE INFO... IF THERE IS ANYONE OUT THERE THAT CAN GIVE ME MORE INFORMATION, FEEL FREE TO GIVE SO... THANKZ
THANKS FOR THE INFO... IF THERE IS ANYONE OUT THERE THAT CAN GIVE ME MORE INFORMATION, FEEL FREE TO GIVE SO... THANKZ
Trending Topics
Honda-Tech Member
Joined: May 2004
Posts: 84
Likes: 0
From: crownsville, md, usa
Re: Eg w/JDM H22 What Chip to USE on P28 (yangja)
if you have a millon dollar you can go with hondata otherwire i would go with this company i found on the web they pretty much anything u are looking for when i comes to chips and there only 25 dollars for a chip kit. here the site http://home.socal.rr.com/mvcompany/ and they are go chip cause i know from experience.
Joined: Apr 2002
Posts: 2,537
Likes: 0
From: TENNESSEE
Re: Eg w/JDM H22 What Chip to USE on P28 (yangja)
I would never go with a JUN or Mugen or Spoon chip. The reason why is that they are all generic and in no way are specific to what you have in your car. Give eric a call and tell him what you wanna do and hell burn you a custom chip. http://www.ericksracing.com/ecuobd1.htm Also i would go with a P72 or a P13 before i ever went with a P28. Good luck. 
Thread Starter
Junior Member
Joined: May 2004
Posts: 348
Likes: 0
From: At your Door, CA, USA
Re: Eg w/JDM H22 What Chip to USE on P28 (MPower332TI)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MPower332TI »</TD></TR><TR><TD CLASS="quote">I would never go with a JUN or Mugen or Spoon chip. The reason why is that they are all generic and in no way are specific to what you have in your car. Give eric a call and tell him what you wanna do and hell burn you a custom chip. http://www.ericksracing.com/ecuobd1.htm Also i would go with a P72 or a P13 before i ever went with a P28. Good luck. </TD></TR></TABLE>
thanks for the info... i'll surely give him a call...
</TD></TR></TABLE>thanks for the info... i'll surely give him a call...
Honda-Tech Member
Joined: Jan 2002
Posts: 5,690
Likes: 0
From: 13.9 at 101.76mph, 2420lbs, FL, USA
Honda-Tech Member
Joined: Aug 2002
Posts: 7,939
Likes: 2
From: FL
Re: (JDMCRXDelSol)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMCRXDelSol »</TD></TR><TR><TD CLASS="quote">Damn, what a newbie 
</TD></TR></TABLE>
And you are?
The guy asked a legitament question and by his question we can tell he is far from a noob. Your reply was usless......as was mine, but atleast you might stop "trying" to be a dick.
A+ for effort though
</TD></TR></TABLE>And you are?
The guy asked a legitament question and by his question we can tell he is far from a noob. Your reply was usless......as was mine, but atleast you might stop "trying" to be a dick.
A+ for effort though
Thread
Thread Starter
Forum
Replies
Last Post
oramac_eg
Honda Civic / Del Sol (1992 - 2000)
17
Nov 12, 2009 02:11 PM
