If so, what make and model car is it from? It needs to line up with the two holes in the front bumber.

THANKS!

 

dont put an H emblem up there..it wouldn't make any sense..only honda integras came with front end conversions unless u are rocking UK style

 

i agree. dont put a H on there unless you got a jdm fron end conversion and it looks jdm at least on the outside.

 

Don't do it, unless you want attention. I had a Honda badge on my teg for awhile and EVERY chick who commented on my car always asked why it had a H instead of a A and I had to explain. It got annoying after awhile. If you had a Jdm front end I could see you justifying it.

 

You know guys that they did make a honda integra with the 94-97 bumper right? I say do it, it looks so much better and how hard is it to say the integra is a honda in japan if people ask you.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dfunkd &raquo;</TD></TR><TR><TD CLASS="quote">You know guys that they did make a honda integra with the 94-97 bumper right? I say do it, it looks so much better and how hard is it to say the integra is a honda in japan if people ask you. </TD></TR></TABLE>

I agree, the Sir-G doesnt have the ITR front and its still a HONDA!! I used a H off a 97 civic coupe. Im not sure if it gonna fit up front, but the holes line up with the ones on the hatch!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dfunkd &raquo;</TD></TR><TR><TD CLASS="quote">You know guys that they did make a honda integra with the 94-97 bumper right? I say do it, it looks so much better and how hard is it to say the integra is a honda in japan if people ask you. </TD></TR></TABLE>

yup, read my first post..

even though they did i still wouldn't..JDM over anything else

 

my front bumper round lights came w/ a honda badge, got it from password JDM, i have 2 change the steering wheel so i wont have anymore acura crap on my car

 

those are your lights though...there is a lot of honda stuff on my car but i always think that if i dont have a front end conversion then why put the honda badge on it... if you want dope emblems get a jdm dc5 integra one or that one GS-R one..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rough_draft &raquo;</TD></TR><TR><TD CLASS="quote">dont put an H emblem up there..it wouldn't make any sense..only honda integras came with front end conversions unless u are rocking UK style</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SIK IN DA HED &raquo;</TD></TR><TR><TD CLASS="quote">i agree. dont put a H on there unless you got a jdm fron end conversion and it looks jdm at least on the outside.</TD></TR></TABLE>

You guys need to do some more research, Japan was the ONLY country to have the "JDM front end" on 96-01 Integras. Yet in EVERY country outside of North America, Integras had H emblems on them.

To answer the original question, a 92-95 Civic hood emblem will fit the holes exactly on the Teg front bumper.

 

Thanks! I'm gonna do it. Why the hell not? After all, the valve cover says Honda on it, and I want my Teg to be a little different.

 

different? Just like many many Integras on this board.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PatrickGSR94 &raquo;</TD></TR><TR><TD CLASS="quote">different? Just like many many Integras on this board.

</TD></TR></TABLE>

Ok...Different in my part of town...

 

word

 

I used Honda Insight Grand Prix red emblems. They attach like the cheap aftermarket ones but they don't get dirt in them like the cheap ones do.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dfunkd &raquo;</TD></TR><TR><TD CLASS="quote">You know guys that they did make a honda integra with the 94-97 bumper right? I say do it, it looks so much better and how hard is it to say the integra is a honda in japan if people ask you. </TD></TR></TABLE>

preferences, schmefrences
&lt;------------mah man obviously prefers the H

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SloGizzer &raquo;</TD></TR><TR><TD CLASS="quote">

I agree, the Sir-G doesnt have the ITR front and its still a HONDA!! I used a H off a 97 civic coupe. Im not sure if it gonna fit up front, but the holes line up with the ones on the hatch!</TD></TR></TABLE>

errr I think u meant the si-vtec model!!! not the sir-g

 

No one still hasn't answered his question. Is it or is it not a direct replacement?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PatrickGSR94 &raquo;</TD></TR><TR><TD CLASS="quote">different? Just like many many Integras on this board.

</TD></TR></TABLE>
nice ***

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ozzyman &raquo;</TD></TR><TR><TD CLASS="quote">No one still hasn't answered his question. Is it or is it not a direct replacement?</TD></TR></TABLE>

time to go back and read the thread

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PatrickGSR94 &raquo;</TD></TR><TR><TD CLASS="quote">To answer the original question, a 92-95 Civic hood emblem will fit the holes exactly on the Teg front bumper.</TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PatrickGSR94 &raquo;</TD></TR><TR><TD CLASS="quote">

time to go back and read the thread

</TD></TR></TABLE>

Damn it. I skimmed through it too fast.

 

Dont need a JDM front to Justify putting an H emblem on! I've got 94-97 front, which came with the H emblem, cause It is a Honda, Si vtec. I've seen Acura A badges here on JDM si vtecs So I guess the H from a JDM teg is interganchable, dunno, but wont be hassle to put any H badge on anyway. All tegs should have H badge IMO, its is really a Honda.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by iH8RICERZ &raquo;</TD></TR><TR><TD CLASS="quote">word
</TD></TR></TABLE>

now thats a NICE ***

 

I dont wanna change to the honda badge cause u know those ricers that will jack anything they see then rock it on their backpacks.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wreckedmyteg &raquo;</TD></TR><TR><TD CLASS="quote">Thanks! I'm gonna do it. Why the hell not? After all, the valve cover says Honda on it, and I want my Teg to be a little different.</TD></TR></TABLE>

ok...right, is that jdm? or usdm? or ukdm? honda emblem on usdm front..i dont get it..