my fluid was out for my clutch so i filled it up but it still sticks once in a while. i was told to bleed the slave cylinder or something like that to get the air pockets out. how do i do this. i have b16 transmission.

 

The slave is located on the front of the transmission case, to the left of the lower half of the exhaust manifold. To bleed it, depress the clutch a few times (let the hydraulic pressure build up a bit). I believe it is a 10 mm, I may be wrong. Break the nut at the tip of the slave loose in a QUICK manner, the fluid should spray out due to all the pressure built up inside. Do this 3 or 4 times to make sure all the air is out of the system. Air in the hydraulics can make the world of a difference!