DIY/ How To : relocating you deck to lower din in a ek
Thread Starter
Junior Member
Joined: Sep 2003
Posts: 816
Likes: 0
From: austin, tx
DIY/ How To : relocating you deck to lower din in a ek
first the tools that you gonna need are:
1-phillips head screw driver
first you going to remove your deck from the upper din
ok know thats done, know you going to take out your armrest, there two screws towards the from of the armrest.once the screws are out just pull back and then slide it over the ebrake..
know your going to remove the lower din/cup holder cover. there a total of 4 screws ,two on each side.. once the screws are out your going to take you sift *** off.. after all of this is off pull the plast piece out ..
ok know you have access to the cupholders/lower din.. there four screws that hold it in place..once you take the screws out the pocket/cupholders should be free...
ok know there should be 4 screws connecting you pocket to the lower din, or in my case they were holding onto a factory honda tape deck.. unscrew the 4 screws then put the tray to the side... now take you deck and with out the cage(the little metal thingy that goes around the deck)slide your deck into place.. know if you turn the lower din to the side with the deck inside you'll notice that the screw holes that were holding your pocket in there should line up with your deck.. take the screws that you took of from the pocket and use them to hold your deck in...
know pull you harness down from the top to the bottom , then connect everything and, assemble in reverse
then to cover the upper din , you can a- put you stock deck, or b- use a piece of abs plastic to cover it...
ok its not the greatest write up but you get the idea.....
1-phillips head screw driver
first you going to remove your deck from the upper din
ok know thats done, know you going to take out your armrest, there two screws towards the from of the armrest.once the screws are out just pull back and then slide it over the ebrake..
know your going to remove the lower din/cup holder cover. there a total of 4 screws ,two on each side.. once the screws are out your going to take you sift *** off.. after all of this is off pull the plast piece out ..
ok know you have access to the cupholders/lower din.. there four screws that hold it in place..once you take the screws out the pocket/cupholders should be free...
ok know there should be 4 screws connecting you pocket to the lower din, or in my case they were holding onto a factory honda tape deck.. unscrew the 4 screws then put the tray to the side... now take you deck and with out the cage(the little metal thingy that goes around the deck)slide your deck into place.. know if you turn the lower din to the side with the deck inside you'll notice that the screw holes that were holding your pocket in there should line up with your deck.. take the screws that you took of from the pocket and use them to hold your deck in...
know pull you harness down from the top to the bottom , then connect everything and, assemble in reverse
then to cover the upper din , you can a- put you stock deck, or b- use a piece of abs plastic to cover it...
ok its not the greatest write up but you get the idea.....
Trending Topics
Honda-Tech Member
Joined: Jan 2003
Posts: 170
Likes: 0
From: San Marcos, TX, USA
Re: DIY/ How To : relocating you deck to lower din in a ek (Running Zombie)
I've thought about taking out my deck and locating it down there and putting my VAFC where my deck is. only thing is my VAFC hasnt come in yet (been on back-oder for almost a month (summit-racing)) so i dont know if it'll fit.
o well, nice right up
o well, nice right up
Thread Starter
Junior Member
Joined: Sep 2003
Posts: 816
Likes: 0
From: austin, tx
Re: (civic_rice)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pdiggitydogg »</TD></TR><TR><TD CLASS="quote">I didnt think is was complicated enough for a how-to...
oh well though</TD></TR></TABLE>
it really isnt, but theres alot of people that have been asking how to do it , so i thought id give them a hand..
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Shaun »</TD></TR><TR><TD CLASS="quote">any pic's of the finished product?</TD></TR></TABLE>
oh well though</TD></TR></TABLE>
it really isnt, but theres alot of people that have been asking how to do it , so i thought id give them a hand..
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Shaun »</TD></TR><TR><TD CLASS="quote">any pic's of the finished product?</TD></TR></TABLE>
Thread Starter
Junior Member
Joined: Sep 2003
Posts: 816
Likes: 0
From: austin, tx
Re: DIY/ How To : relocating you deck to lower din in a ek (tshaw)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tshaw »</TD></TR><TR><TD CLASS="quote">has anyone ever relocated the heater controls</TD></TR></TABLE>
nope i think that would be a waste of time. if you want them relocated do a 99-00 swap, someone did a write up on it
nope i think that would be a waste of time. if you want them relocated do a 99-00 swap, someone did a write up on it
Thread
Thread Starter
Forum
Replies
Last Post
SPOONfdEK
Honda Civic / Del Sol (1992 - 2000)
1
Jun 5, 2003 01:30 PM
VoltageLS
Honda Civic / Del Sol (1992 - 2000)
5
Mar 31, 2002 07:48 AM
