I wanted to know if i would run in to any problems using a intake mani from a auto on my 5spd car ive heard that its different and cant be used?


ideas?

 

It can be used and modified to work. I modified mine but have not put it on.

 

Manual Cars=IAC
Auto Cars=NO IAC

 

i have one for $25 dollars off of auto

 

get the manual one if possible
you can mod the auto but its a pain in the *** cuz you ahve to drill and align 2 drill holes

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JSPECHB &raquo;</TD></TR><TR><TD CLASS="quote">Manual Cars=IAC
Auto Cars=NO IAC</TD></TR></TABLE>

Manual Cars=2 wire IACV on manifold
Auto Cars=3 wire IACV on throttle body

This may help with the install...
http://www.geocities.com/joeyp....html

 

here are 2 which is which?

http://cgi.ebay.com/ebaymotors...sting

http://cgi.ebay.com/ebaymotors...%3AIT

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Stoich &raquo;</TD></TR><TR><TD CLASS="quote">
http://cgi.ebay.com/ebaymotors...sting </TD></TR></TABLE>

looks like a z6 manifold

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Stoich &raquo;</TD></TR><TR><TD CLASS="quote">
http://cgi.ebay.com/ebaymotors...%3AIT</TD></TR></TABLE>

auto y8 manifold (from 2000...has air injection deal...)

 

so how do i tell them apart in pics?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Stoich &raquo;</TD></TR><TR><TD CLASS="quote">here are 2 which is which?

http://cgi.ebay.com/ebaymotors...sting

http://cgi.ebay.com/ebaymotors...%3AIT</TD></TR></TABLE>

The first one looks like an A6 but its got me a bit confused....

The second one is a Y8 BUT 99 and 2000 do not bolt up easy! You must shaved off the whole air injection part. Its complicated to explain.... I had to do it. I am not sure if it works because I have no bolted on the manifold yet.... It sure looks like it will though. I think I will test fit it tomorrow. No longer doing my D series project so I have parts all over lol

 

does this help?



you will have to drill and tap the red hole, drill the green hole straight through, and drill the blue hole halfway through and then drill from the throttle body mating surface into that hole.

then you can use a normal 2 wire iacv, and any throttle body you want...