I'm going to use either a Venom or Golden Eagle intake and niether has a throttle cable mount.I'm going to try and use a GSR TB that has a cable mount right on it.If your running this TB in your EF,what throttle cable did you use? and does the cable rub up against the hood?

This is a pic of the GSR TB I'm thinking about buying,sorry its upside down




Modified by D-Man at 5:05 PM 3/16/2004

 

I would imagine that you would have to use a gsr throttle cable to acccommodate
that bracket.

 

does the GSR Cable fit in a EF?

 

I dont see why it wouldnt. Ryan

 

I figure were its mounted to the firewall and gas pedal I might run into problems

 

ttt

 

I out a gsr t/b on my engine, I removed the throttle wheel and replaced it with one from an EX throttle body. WARNING this is a pain in the *** but and I recommend doing this in an area where you will not lose anything, eg. not in the engine bay. When changing the wheel, use the sohc return spring not the gsr as the wheels are clocked just a bit different.

 

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bspeed &raquo;</TD></TR><TR><TD CLASS="quote">I out a gsr t/b on my engine, I removed the throttle wheel and replaced it with one from an EX throttle body. WARNING this is a pain in the *** but and I recommend doing this in an area where you will not lose anything, eg. not in the engine bay. When changing the wheel, use the sohc return spring not the gsr as the wheels are clocked just a bit different.</TD></TR></TABLE>

did u not read his question, the whole reason he needs to know this is cause hes in the market for a aftermarket intake manifold which doesnt support the throttle cable on one of the runners like a factory style manifold would.

i usually use a 90-91 integra cable, or u can custom the cable to work by cutting a lil of the jacketing off at the pedal side of the cable for more length.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Fobtions &raquo;</TD></TR><TR><TD CLASS="quote">
i usually use a 90-91 integra cable, or u can custom the cable to work by cutting a lil of the jacketing off at the pedal side of the cable for more length.</TD></TR></TABLE>

Thanks so the integra cable bolts right in without any mods,just want to be sure before I go out and buy one.

 

Well, since you know that the teg 94-00 will fit at the throttle body end, take off your crx one, and bring it to the parts shop. If the pedal side is the same, go with the whole 94-00 teg piece. My 2 cents. Ryan

 

looks liek the bracket would hit the hood cause the GSR manifold is so so so very much lower then a aftermarket one for a ef...

Tory

 

i use a zip tie to hold down my cluch cable.... my timing belt would rub on my cable if i used the bracket...... so i rerouted it a bit and zip tied it..... hey zip ties, bubble gum and duct tape cant be beat..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by warchild69 &raquo;</TD></TR><TR><TD CLASS="quote"> hey zip ties, bubble gum and duct tape cant be beat.. </TD></TR></TABLE>

Yeah,cant be beat If I wanted to ghetto it

so....anyone else use one?