I have a progress camber kit on my car, but it doesnt allow enough angle to correct my camber, so I was thinking of going with an Ingalls Camber kit. I was wondering if anyone could give me a step by step guide on how it install a Camber kit? I would greatly appriciate it...

 

Front, Rear, both? Rear is easier, but even front is possible for a newb (like me) to do. I put Ingalls on all the way around. I'll try to help. What model Integra? You might check both Team-Integra and G2IC. They both have DIY sections for this kind of stuff.

 

I have a 90 integra... I'd like how to's for both if you could help... I'd greatly appriciate it

 

Here is a link to Front Ingalls install on G2IC. It gives you the general idea.

http://217.160.249.230/forums/...galls

Are you familiar with G2ic or Team-Integra? There may be simliar articles here at H-T, I'm just a newb here myself though. Did you try searching here?

Also, the Ingall's kits come with instructions. The rear is almost too easy.

Here is a link to rear on G3. Process is pretty much the same.

http://www.team-integra.net/se...D=652

You will probably need to register on TI to view the article.

Modified by oldDude at 1:56 AM 3/16/2004


Modified by oldDude at 1:57 AM 3/16/2004