Make offers on all. I need to move all this stuff. I have pics on request on everything.


5th Gen Prelude

H22A4 complete head 44k, has valves, valve springs, retainers, Cams, cam gears, cam caps and holders.
Upper exhaust manifold
Flex plate
External coil
Distributor, Complete
Distributor, missing Cap and rotor
Stock flywheel, 44k
Stock clutch, 44k
Prelude crossmember and steering rack
P/S pump
A/C compressor
Alternator
Rear engine bracket
5sp Tranny bracket
Sub engine harness
2 Front engine brackets
2 Side H22A heat shields
A/C bracket
Vtec Solenoid
2 Water outlet cover
CKP/TDC sensors
Lower control arm
Fuel Rail

5th gen Accord
F22B1 5sp tranny, 140k
Axles, driver and passenger
Sub engine harness
Stock cat
Stock rear engine mount
Stock driver side mount

Misc.
92-96 Prelude Rear ABS sensors
92-96 Prelude Stock Air inlet pipe and box


Modified by Fly1865 at 1:29 PM 2/23/2004


Modified by Fly1865 at 12:50 PM 2/27/2004


Modified by Fly1865 at 10:25 AM 2/28/2004


Modified by Fly1865 at 10:26 AM 2/28/2004


Modified by Fly1865 at 10:13 AM 3/1/2004


Modified by Fly1865 at 9:40 AM 3/5/2004


Modified by Fly1865 at 10:14 PM 3/7/2004


Modified by Fly1865 at 5:45 PM 4/25/2004


Modified by Fly1865 at 12:33 AM 5/12/2004


Modified by Fly1865 at 11:11 PM 7/18/2004


Modified by Fly1865 at 12:09 PM 8/24/2004

 

bump for the fast moving forum.

 

what does the hybrid harness consist of? i need one for my 95 lx 5spd. i am in the middle of the h22 swap and my stock harness is shot. please let me know asap. my email is adrenalinechase@yahoo.com thanks much.

 

Its a used Accord EX harness, wired up to use the H22A with the external coil, the butterflys and the knock sensor.

 

do you know if it will work with an lx? are they the same? thanks much.

 

I pretty sure it'll work on an LX. The plugs ( firewall plugs) should be the same for those Accord year models.

 

cool. if you could find out for sure or if anyone else knows that would be great. are all the splices and things done well? how much would you want for it? thanks again.

 

I sodered all the connections and then used heat shrink then rapped it with that black bent stuff ( like used on the harness) and then used electric tape to top it off. I would like to get $100 for it cause it took some time to really redo all the wiring and make it look good.

 

could you send some pics of it to me through email? it is the complete harness motor to the ecu correct? also, i just need to know that it will work in my lx before i pick it up. i would love to figure this out asap. can anyone help with this question?

 

Its just the engine harness. It goes to the firewall plugs. I'll get those pics to you, whats your e-mail address?

 

adrenalinechase@yahoo.com

thanks

 

hey, also, how much for the lude power steering pump?

 

40 bucks for the PS pump.

 

What year is the motor. Looking for a 96-97 f22b1 distributor

 

1995 EX

 

What are youl looking at for the head?

 

Juiceedh22 you have been PM'ed

 

did you send pics of the harness yet?
adrenalinechase@yahoo.com
thanks

 

Bup from page 14

 

pm'd you about block

 

what you looking to get for head and block?

 

All PM'ed back

 

hey, Did you use the harness and it worked fine and everything? Are there any loos wires that i will have to manually plug in the the ecu or is it plug and play? Also, does it have the sensor plug for the fuel pressure regulator? if you could let me know, that would be awesome. thanks.

 

Sent you the pics. Umm, the only thing you have to do is run the wires for Vtec, butterflies and the knock sensor. I'm not sure what you fuel pressure regulator sensor?.

 

got the pics, thanks. sent you an email back.