FS.. EG/EK/DC 92-00 front camber kit
Thread Starter
Honda-Tech Member
Joined: Jun 2003
Posts: 768
Likes: 1
From: irvine, ca, usa
FS.. EG/EK/DC 92-00 front camber kit
These brand new adjustable upper front controll arms are availible for all 92-00 civic and integra. they have +-4 degrees of adjustment and are the same camber kits used in Roger Foo's World-challenge Civic.
also included is a set of the rear camber shim kit.
$159.99 shipped any where in the 48 states. please feel free to PM me.
if this deal isnt good enough i dont know what is.
Modified by omniman at 11:40 PM 3/20/2004
Honda-Tech Member
Joined: Mar 2002
Posts: 1,575
Likes: 0
Re: (omniman)
i heard somewhere, they were have problems with skunk2 front arms. are these gonna be prone to have the same effects? not tryin to dis your product or anything, but jus wondering.. cause, im interested in a set too..
Honda-Tech Member
Joined: Jan 2004
Posts: 2,733
Likes: 0
From: Unknown
Re: (J_SpeC_EK)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by J_SpeC_EK »</TD></TR><TR><TD CLASS="quote">i heard somewhere, they were have problems with skunk2 front arms. are these gonna be prone to have the same effects? not tryin to dis your product or anything, but jus wondering.. cause, im interested in a set too..</TD></TR></TABLE>
how is it possible to have a problem with somthing like this unless its somthing stupid like they didnt tighten the nuts???
how is it possible to have a problem with somthing like this unless its somthing stupid like they didnt tighten the nuts???
Trending Topics
B*a*n*n*e*d
Joined: Feb 2002
Posts: 6,621
Likes: 0
Re: (omniman)
Ive seen many horror stories on here that sometimes they bend, or hit the strut wall...
I dont know i was hesitant to keep my skunk arms.. But still out of the thousands of skunk arms sold, ive only seen a couple complaints..
I dont know i was hesitant to keep my skunk arms.. But still out of the thousands of skunk arms sold, ive only seen a couple complaints..
Honda-Tech Member
Joined: Feb 2002
Posts: 6,447
Likes: 1
From: Colorado springs, CO
Re: (omniman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by omniman »</TD></TR><TR><TD CLASS="quote">
sorry but i dont have EF camber kits availible at this time.
</TD></TR></TABLE>
Alright, let me know if anything is fabbed up! good lu ck with your sales.
sorry but i dont have EF camber kits availible at this time.
</TD></TR></TABLE>Alright, let me know if anything is fabbed up! good lu ck with your sales.
Honda-Tech Member
Joined: Oct 2002
Posts: 1,460
Likes: 0
From: SomeWhere Over The RainBow
Re: (hulkhb)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by omniman »</TD></TR><TR><TD CLASS="quote">
My name is Steve Rothenbuehler aka "omniman", I worked for skunk2 as the Head engine builder, race developement and product developement technician for over 4 years. from feb 99- march 03. I built all the engines and transmissions for the skunk2 drag car and also many world challenge cars such as Roger Foo, as well as did nearly all the cam, manifold,suspension, and parts testing,developement and prototyping. During my 4 years of employment with skunk2, naturally I developed a close realtionship with the manufacturers that produced skunk2 products. After parting with Skunk2 I decided to use the many manufacturing contacts I worked with to establish my own product line. </TD></TR></TABLE>
great resume!
im lookin into buying a set
My name is Steve Rothenbuehler aka "omniman", I worked for skunk2 as the Head engine builder, race developement and product developement technician for over 4 years. from feb 99- march 03. I built all the engines and transmissions for the skunk2 drag car and also many world challenge cars such as Roger Foo, as well as did nearly all the cam, manifold,suspension, and parts testing,developement and prototyping. During my 4 years of employment with skunk2, naturally I developed a close realtionship with the manufacturers that produced skunk2 products. After parting with Skunk2 I decided to use the many manufacturing contacts I worked with to establish my own product line. </TD></TR></TABLE>
great resume!
im lookin into buying a set
Honda-Tech Member
Joined: Apr 2002
Posts: 2,277
Likes: 0
From: mn
Re: (gsober)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gsober »</TD></TR><TR><TD CLASS="quote">are there markings on the arms for the different degree settings? </TD></TR></TABLE>
i would like to know this too
i would like to know this too
Honda-Tech Member
Joined: Dec 2002
Posts: 4,183
Likes: 0
From: PSL, florida, us
Re: (omniman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by omniman »</TD></TR><TR><TD CLASS="quote">http://www.racerpartswholesale.com/align.htm
</TD></TR></TABLE>great link to a usefull tool
</TD></TR></TABLE>great link to a usefull tool
Honda-Tech Member
Joined: Jul 2002
Posts: 5,695
Likes: 0
From: Chicagoland, usa
Re: (garth)
I'll be snagging a set. I can give track reviews after mid march if anyone wants. Although I doubt i'd abuse them as much as the WC guys, although my offtrack events are always interesting....
