I was wondering if any body has used the Energy Suspension Motor Mount Inserts for the 4th Gen 92-96 preludes on a 97 up? Or is there some other company that makes them because i cant find any. thanks.

 

yes they will work on your 5th gen. buy them off shaun, i just got a set for 32 shipped, https://honda-tech.com/zerothread?id=713941

 

Thanks alot! For anybody thant has these in their 4th or 5th gen, post if you like them or not, and if they are worth the effort.

 

well i just got them and i thinks its well worth the money. however the car will shake/rattle at idle as a result of the inserts. its well worth it though, eliminated my wheel hop and shifts feel much stronger.

 

^^^what he said, some vibration, but good really cheap mod.....

 

Is Joel the only person that used just the front insert?

i'm thinkin about pickin up a set, and just installin the front ones.

 

Maybe im not reading it right, but dont the inserts come in a package or do you have to buy them seperate, or did you guys just only install the front ones, sorry, it's late an maybe im askin stupid questions

 

they come in a set, however people don't install the rear insert in an attempt reduce vibration or they are being lazy. installing the rear mount isn't very fun.

hers a great install write up by 4Bidden http://members.***.net/4bidden/mount_install/

 

comes as a set. front and rear.

the only person i read that has only installed the front was satan_srv.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by satan_srv &raquo;</TD></TR><TR><TD CLASS="quote">I just put in the front. That's really the only place you need it.</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by satan_srv &raquo;</TD></TR><TR><TD CLASS="quote">

It experiences a backwards rotational force. The front mount can equally stop the rotational force, but with the added benefit that when the motor is not under load it rests on the softer rear mount.

watch my dyno vid....214whp 167tq and my engine doesn't move with the front mount only http://satan.higginstribe.com/nov18dyno.mov

Instead the car tries to lift itself off te dyno </TD></TR></TABLE>

 

ya id be interested to hear some more info on the mounts ina 5th gen.

 

Thanks for the link, I ordered some today.

For anybody that has installed all of the inserts, how hard were they to install, and can you do it without pulling the motor, sorry I havn't ever done these so Im not sure what to expect.

Oh **** sorry, I didn't see that install link, mah bad

 

I installed the front mount insert ( i am gonna wait till i pull the motor for the rear) and the affect was amazing. not only did it not rattle the doors off like everyone says, it completely eliminated wheel hop, and now I can't even break traction in 2nd, when before the mounts i could chirp third, hands down the best 32 dollar mod you could do, talk to Shaun and he has awesome deals on them https://honda-tech.com/zerothread?id=713941. peace out, oh yeah, it took like 45 mins to install and was farily simple.

 

it didnt rattle because you didnt put the rear insert in

sounds good. i'll just install the front too

 

i installed the front mount today and it made a huge differance, the car feels awsome when shifting.Thanks alot

 

Yeah, I'm happy with just installing the front mount, cuase it did so much, and it saves you from the rattles that using both gives you, I might put it in when I pull the motor, but I am more than satisfied with the results of the front

 

i need some mounts just wondering if i can post

 

i have the ES ones and it was worth the 30-40bucks

 

Shaun got mine for $32 shipped you can check this thread https://honda-tech.com/zerothread?id=713941