Basicly as topic states. When i press on my clutch pedal theres a squeak, it recently started doing it when my axle popped out. i replaced axle and changed tranny fluid , anyone have any idea what this might be

 

throw out bearing maybe

 

I have the same problem. I was thinking it was the throwout bearing also, but I ain't sure.

 

It's probably the throwout bearing, it could be the clutch cable also.

 

i think when the throwout bearing goes out it makes a wizzing noise when u push the clutch in. people told me its the slave cylinder

 

Please search. This topic has been beaten to death.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tub_sephiroth &raquo;</TD></TR><TR><TD CLASS="quote">Please search. This topic has been beaten to death.</TD></TR></TABLE>i did but i didnt find anything thats why i asked ................... it was a diy

 

Most likely not the throwout bearing.

Look at the slave cylinder. Peel back the rubber boot, and squirt some silicone lube in there. If you want to take it apart, get some grease on the rod inside the cylinder.

Also get under your dash and lube up the pivot point on the clutch pedal. This should alleviate 99% of your squeaking issues.