will itr lca's fit an ek?
Thread Starter
Member
Joined: Sep 2002
Posts: 2,032
Likes: 0
From: Southern Cali
will itr lca's fit an ek?
i have 5lug on my dc, and nice suspension. if i buy an ek will every thing change over? can i run itr lca's which will allow me to keep my current suspension?
Honda-Tech Member
Joined: May 2000
Posts: 6,094
Likes: 6
From: PASADENA, CA, USA
Re: (92b16vx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92b16vx »</TD></TR><TR><TD CLASS="quote">Yes 
</TD></TR></TABLE>
NO NO NO!!!!!!
ITR rear LCA's will NOT work on an EK (nor will the fronts). The rears are too short in length and the front LCA's are of different geometry. You have to stick with EK front upper A-arms * LCA's + rear LCA's when converting to 5-lug. The ITR front knuckle+brake assembly and rear trailing arms will bolt up to an EK chassis as long as you keep the EK parts I just mentioned....
</TD></TR></TABLE>NO NO NO!!!!!!
ITR rear LCA's will NOT work on an EK (nor will the fronts). The rears are too short in length and the front LCA's are of different geometry. You have to stick with EK front upper A-arms * LCA's + rear LCA's when converting to 5-lug. The ITR front knuckle+brake assembly and rear trailing arms will bolt up to an EK chassis as long as you keep the EK parts I just mentioned....
Junior Member
Joined: Feb 2004
Posts: 163
Likes: 0
From: NY
Re: (Hella_JDM)
The LCA will not fit
I have a DC2 R 5 lug conversion on my EK
the DC2 LCA's were about two inches too short on each side
and i used 99 SI rear LCA so that i could use a ITR sway bar
hope that helps confirm what was said above
I have a DC2 R 5 lug conversion on my EK
the DC2 LCA's were about two inches too short on each side
and i used 99 SI rear LCA so that i could use a ITR sway bar
hope that helps confirm what was said above
Thread
Thread Starter
Forum
Replies
Last Post
lDanny
Honda Civic / Del Sol (1992 - 2000)
13
Jun 10, 2004 02:00 PM
{Powered by VIII}
Honda Civic / Del Sol (1992 - 2000)
8
Mar 19, 2004 01:00 AM
