Selling a fully built short block stroker motor. This is a legit ITR short block with Golden eagle sleeves (86mm bore), Golden eagle deck plate, 95mm crower crank, pistons, custom (Cunningham) connecting rods, golden eagle water pump, golden eagle off-set kit for use with stock GSR timing belt, oil line with sensor, ARP head studs made for deck plate setup and ITR girdle. I'll be updating this post again tomorrow with more details on piston CR, dome cc's,...etc., pistons have been treated for thermal heat dissipation. piston top has been sand blasted. ITR Short block, crower crank, pistons, rods, water pump...etc., will not be parted out since they were all designed to work as a whole. If Jerry's Alaniz head was used on this block setup, it would have put down over 270 whp. Taking offers on the whole block assembly.

































Clutchmasters twin disk clutch with throw out bearing used for 1,000 miles $900






Brand new JG Intake manifold for B16 head SOLD


Brand new 72mm JG throttlebody SOLD


USDM OBD1 P72 GSR ECU chipped with Hondata S100 program $370


Crower titanium retainers $125


Various exhaust piping...some with mandrel bends...taking offers.








EDIT - new pics of the Cunningham custom rods below







All prices above do not include shipping costs. Please pm or email me with offers for the block and the piping.


Modified by acydphryck at 5:15 PM 1/25/2004


Modified by acydphryck at 6:57 PM 1/26/2004


Modified by acydphryck at 7:28 PM 1/27/2004


Modified by acydphryck at 6:44 PM 2/24/2004

 

Bump if thats greg's setup.

If its greg's setup, then I can vouch for the block. I sold it to him, that **** was blown the **** up.

2.2L b18c5.

This block would have seen 270 w/ no problem.

 

hi

 

What are you asking for the block?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AllMotorCRX161 &raquo;</TD></TR><TR><TD CLASS="quote">What are you asking for the block?</TD></TR></TABLE>

you've got pm

 

TTT

 

how much for the throttle body shipped to 27858 nc....im definately interested.. does it come as pictured.....how much would u include map and tps if u have it


Modified by 95swappedsi at 10:32 PM 1/25/2004


Modified by 95swappedsi at 11:05 PM 1/25/2004

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 95swappedsi &raquo;</TD></TR><TR><TD CLASS="quote">how much for the throttle body shipped to 27858 nc....im definately interested.. does it come as pictured.....how much would u include map and tps if u have it


Modified by 95swappedsi at 10:32 PM 1/25/2004


Modified by 95swappedsi at 11:05 PM 1/25/2004</TD></TR></TABLE>

you've got pm
i'll check on the O2 sensors and the starter too

 

just added new pics of the cunningham custom rods above... bump

 

i ll give u four dollars and fifty cents for the whole setup i am a pooor mother *****

 

That's some hardcore shiet right there. Do you have any 2.5" mandral piping for the Civic or Integra?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Skeletor &raquo;</TD></TR><TR><TD CLASS="quote">That's some hardcore shiet right there. Do you have any 2.5" mandral piping for the Civic or Integra?</TD></TR></TABLE>

i think so...what kind of civic/integra are you looking for? let me know then

 

coupe

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Skeletor &raquo;</TD></TR><TR><TD CLASS="quote">coupe</TD></TR></TABLE>

is that a civic coupe you have? what year is it?

 

he's selling his rolling chassis now guys...will be posting pics soon...

 

block's bore is 86mm

 

another bump for my old motor.

I have the title to the car tht matches w/ the motor's vin and can give the buyer a reciept so you know its legit if needed, just to help to sale of this motor.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 00 FBP ItR &raquo;</TD></TR><TR><TD CLASS="quote">another bump for my old motor.

I have the title to the car tht matches w/ the motor's vin and can give the buyer a reciept so you know its legit if needed, just to help to sale of this motor. </TD></TR></TABLE>

YEA!!! thanks for backing up greg's motor dude...much appreciated...

 

KAAAAAAA SPOOOOOOOOOGE

 

forgot to mention that short block comes with matching head gasket

 

Up for Joe

 

I will take your JG intake off ya for $250 shipped??

 

how much r u lookin to get for the motor?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SinisterCivic &raquo;</TD></TR><TR><TD CLASS="quote">how much r u lookin to get for the motor?</TD></TR></TABLE>

you've got pm

 

a couple of people here have asked what my friend's asking price is...i hate posting numbers up here so please keep sending pm and i'll respond with his asking price