i saw a post about this long time ago.. for 2.5" piping that is in shaped of a donut to make down pipe.

 

i think thats a turbo or something

 

roadraceenginering.com has them. Its a DSM supply store but they are cool.

Rob

 

like this.
heres the link. its at the bottom, exhaust donuts
http://www.roadraceengineering...s.htm

 

My friend and I have been fascinated by those, it's like their god-damned magic! I mean, it doesn't seem to have a ******* seam! This has nothing to do with anything, except that it's cool enough to put on your coffee table, IMO!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ion_four &raquo;</TD></TR><TR><TD CLASS="quote">My friend and I have been fascinated by those, it's like their god-damned magic! I mean, it doesn't seem to have a ******* seam! This has nothing to do with anything, except that it's cool enough to put on your coffee table, IMO! </TD></TR></TABLE>

LOL! I'm absoultey mezmorized by those things!

 

Seriously, I haven't a clue what those would be used for (just to cut/use?) but they're cool as hell. I want one for my room

 

for real, how do you make those things without a seam?

 

It's kinda like looking at ****. you can't take your eyes away and you just want to grab one....so hot errr shiny

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bailhatch &raquo;</TD></TR><TR><TD CLASS="quote">It's kinda like looking at ****. you can't take your eyes away and you just want to grab one....so hot errr shiny</TD></TR></TABLE>

LMAO

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bailhatch &raquo;</TD></TR><TR><TD CLASS="quote">It's kinda like looking at ****. you can't take your eyes away and you just want to grab one....so hot errr shiny</TD></TR></TABLE>

puahahhahaahhahah

ill buy 2

 

They are two metal stampings welded together around the inside and outside diameters.They are excellent for tight corners for downpipes and such.
Glenn

 

homer simson would grub on those bad boys

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by iwouldHITit &raquo;</TD></TR><TR><TD CLASS="quote">i saw a post about this long time ago.. for 2.5" piping that is in shaped of a donut to make down pipe.</TD></TR></TABLE>

im looking for that post. anyone know where it is?

 

it was in a crx with compressor on the passenger side and they had to use donuts to clear jimfab traction bars. I need the pictures of this if anyone remembers the thread.

 

The Chassis Shop has them for a bit cheaper than RRE

 

the inside seam isn't welded when u buy the donuts. after u cut the shape u need, you then weld the inside closed.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SEFIxCivic &raquo;</TD></TR><TR><TD CLASS="quote">the inside seam isn't welded when u buy the donuts. after u cut the shape u need, you then weld the inside closed.</TD></TR></TABLE>

and he welds some pimp *** inside seams i might ad

 

bump


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by iwouldHITit &raquo;</TD></TR><TR><TD CLASS="quote">i saw a post about this long time ago.. for 2.5" piping that is in shaped of a donut to make down pipe.</TD></TR></TABLE>


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nevin &raquo;</TD></TR><TR><TD CLASS="quote">

im looking for that post. anyone know where it is?</TD></TR></TABLE><TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nevin &raquo;</TD></TR><TR><TD CLASS="quote">it was in a crx with compressor on the passenger side and they had to use donuts to clear jimfab traction bars. I need the pictures of this if anyone remembers the thread.</TD></TR></TABLE>