Todd Steiner's Carbing front lower bar install.
Thread Starter
Honda-Tech Member
Joined: Mar 2002
Posts: 2,317
Likes: 0
From: 11,000 rpm daily, GA
Todd Steiner's Carbing front lower bar install.
We put a carbing bar on his car. He has also had his jdm front bumper painted and put on. Rear bumper coming soon.
Honda-Tech Member
Joined: Jul 2003
Posts: 4,136
Likes: 0
From: nj
Re: Todd Steiner's Carbing front lower bar install. (HATCHingMN)
i have the rear one but its made by jic magic same exact design and I gotta say it really dose scrape up road kill no lie didnt see the dead raccoon on the road and had no choice but to go over it and my rear tie bar scooped it up hahahah lucky it fell right out because it would really suck if i had to pull it out. 
Trending Topics
Honda-Tech Member
Joined: Sep 2002
Posts: 6,722
Likes: 0
From: sgv, ca
Re: Todd Steiner's Carbing front lower bar install. (Kid1320)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kid1320 »</TD></TR><TR><TD CLASS="quote">real spoons 
</TD></TR></TABLE>
we just have rota styled rims.
btw... good chit todd
</TD></TR></TABLE>we just have rota styled rims.
btw... good chit todd
Honda-Tech Member
Joined: Sep 2003
Posts: 7,917
Likes: 0
From: Honda city, MN, USA
Re: Todd Steiner's Carbing front lower bar install. (careawholelot)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by careawholelot »</TD></TR><TR><TD CLASS="quote">damn that **** looks really low</TD></TR></TABLE>
yep!!
yep!!
Joined: Jul 2003
Posts: 374
Likes: 0
From: Key Largo, FL
Re: Todd Steiner's Carbing front lower bar install. (HATCHingMN)
thanks HT for the comments. I have alot of stuff comin in the mail for the car currentl and will have evn more over the holidays. Oh and thanks to homie Ekfour. 
Honda-Tech Member
Joined: Aug 2002
Posts: 2,901
Likes: 0
From: JDM ricer land, CA
Re: Todd Steiner's Carbing front lower bar install. (Kid1320)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kid1320 »</TD></TR><TR><TD CLASS="quote">real spoons </TD></TR></TABLE>
real DRUM brakes 
</TD></TR></TABLE>real DRUM brakes
Honda-Tech Member
Joined: Feb 2002
Posts: 13,501
Likes: 0
From: Angeles Crest, so cal
Re: Todd Steiner's Carbing front lower bar install. (Plan B)
nice install
Is it just me or does it look like the rim got painted red from the lugs? or is that just a reflection or something??
Is it just me or does it look like the rim got painted red from the lugs? or is that just a reflection or something??
New User
Joined: Mar 2001
Posts: 2,995
Likes: 0
From: 703
Re: Todd Steiner's Carbing front lower bar install. (Todd Steiner)
Not bad...a bit low though. I still have not seen a bar that is designed from the stock one which goes over the cat instead of under it. My itr front lower bar will never scrape.
Junior Member
Joined: May 2002
Posts: 547
Likes: 0
From: San Diego, Ca., United States
Re: Todd Steiner's Carbing front lower bar install. (Kalokohan)
bar is nice but it seems everyone says they scrape. Hope it helps. The next thing I would do is a rear disc brake swap. Drums look so bad to me.
Moderator
Joined: May 2001
Posts: 12,232
Likes: 5
From: Browns Summit, NC, USA
Re: Todd Steiner's Carbing front lower bar install. (Kid1320)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kid1320 »</TD></TR><TR><TD CLASS="quote">real spoons </TD></TR></TABLE>
i have had 2 sets of rotas that you could not tell if they were fake or real!
</TD></TR></TABLE>i have had 2 sets of rotas that you could not tell if they were fake or real!
Thread
Thread Starter
Forum
Replies
Last Post