Just curious how and where you guys had mounted 92+ radiators. I'm trying to get ideas.
thanks,
Jared

 

use the farthest pass side factory mount and fab up one for the other side toward the center of the car .

 

I have a civic half sized fluidyne rad in my 91 CRX I used a Place Raceing Crossmember and a FAL fan. If you want pics e-mail me at insomniac791@yahoo.com
later
Matt

 

biggdogg that will not work because the newer civic radiators are too tall. So that way the hood would not close unless you lean the radiator back real far. I had to do it for 2 weeks until my crossmember came in. The new crossmember sitts lower and has slots for a half sized rad.
later
Matt

 

Why dont you buy the C&R shorty that was made for ED's?
It fits right.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kid-honda &raquo;</TD></TR><TR><TD CLASS="quote">Why dont you buy the C&R shorty that was made for ED's?
It fits right.</TD></TR></TABLE>

I didn't know there was such a thing, is it half size?

 

Yes it is half sized.
exospeed.com has them.

 

$80 or $200... "Ghetto" !!!! I choose you !!!!

 

Those C&R Shorty Radiators are almost half a grand. No thank you.

 

But, you get a slim fan with it, no different than getting a fluidyne 92-95 civic rad, and fal fan, you would be spending about the same.

 

for the same price you might as well stick with an stock EG radiator and get an aftermarket crossmember to accept it...unless you have some serious cooling needs but most people just upgrade to the aftermarket radiators for looks...which they do look great.

 

oh yeah the purpose of this post was for pictures...here you go...this is with the Place Racing cross member

 

Here is mine....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Davep &raquo;</TD></TR><TR><TD CLASS="quote">Here is mine....

</TD></TR></TABLE>

That's very nice. Good job. Do you have a pic of the lower mount?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Davep &raquo;</TD></TR><TR><TD CLASS="quote">Here is mine....

</TD></TR></TABLE>

Fancy

 

That's made to work with a place racing crossmember so it sits in stock lower boots that are made into the crossmember.


Modified by Davep at 6:31 PM 12/8/2003

 

I have A place raceing crossmember with a Fluidyne rad and a Fal fan

http://www.imagestation.com/my...96344

http://www.imagestation.com/my...96349

 

im assuming the dual core del sol rad will fit the same way right?

 

sick *** bracket

 

yea the del sol rad will fit the same way. Did you make that bracket?
Later
matt

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Davep &raquo;</TD></TR><TR><TD CLASS="quote">Here is mine....

</TD></TR></TABLE>

where did you get that bracket from i wont one

 

We made that from a piece of aluminum stock.

 

Are you gonna make anymore I would be interested in one?
later
Matt

 

I have one with the stock crossmember. ComposiMo too. For mine, I cut up the support, and the skeleton above the rad under the hood. I have a ghetto top mount and the bottom is just the draincock resting on the crossmember But hey! it works!

 

Thats a clean bracket