How much can washers on the rear correct the rear camber? I have a -1.2 and -1.3 on the rear i found out today can i corect this with washers?

Thanks

Spencer

 

yes you can. i used 3 but i dont know how much camber i had

 

yes washers will fix that camber problem, but the amount of washers needed depends on how thick the washers are. You have to go by trial and error

 

if youre going with more than 2 washers a bolt.......you might want to look into longer bolts just to be on the safe side.......
i used 2 washers per oem bolt and it was fine......but that was like 2yrs ago so i dont really remember how fine it was.

 

up

 

Anybody got any pics of this? I was wondering about it as well.

 

with -1.2 and -1.3, I don't know that I would even bother. I think that my rear camber is about -1.3 *AFTER* I put the washers in Been that way for a year and a half.

 

i went hardcore and put 4 washers

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spencedogg &raquo;</TD></TR><TR><TD CLASS="quote">-1.2 and -1.3 on the rear</TD></TR></TABLE>

damn that's almost stock camber. i wouldn't even worry about that ****. but if you are, search for washer trick, i've read some things about it, but have forgotten everything. i vaguely remember something 2 washers for every degree - but that depends on the thickness of course.

 

factory specs for an EK:

front:

min: -1 degree
max: 1 degree

rear:

min: -2 degree
max: 0 degree

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Krazipeenoi &raquo;</TD></TR><TR><TD CLASS="quote">i went hardcore and put 4 washers</TD></TR></TABLE>

i have 5 hardened washers. there is nothing hardcore about it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr. Choi &raquo;</TD></TR><TR><TD CLASS="quote">

i have 5 hardened washers. there is nothing hardcore about it.</TD></TR></TABLE>

hardcore? lol... i have no washers and -3 degrees

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr. Choi &raquo;</TD></TR><TR><TD CLASS="quote">

i have 5 hardened washers. there is nothing hardcore about it.</TD></TR></TABLE>

bwahahahahaha

 

i used longer screws and three washers per screw

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr. Choi &raquo;</TD></TR><TR><TD CLASS="quote">

i have 5 hardened washers. there is nothing hardcore about it.</TD></TR></TABLE>

5 is too many.....u have no camber now?...you have to have atleast some camber..if not.... u can't handle worth ****.