Code 9 on obd0 1991 crx si.....

Reply Subscribe

Thread Tools

Search this Thread

Nov 25, 2003 | 01:23 PM

Sirex

Thread Starter

Junior Member

Joined: Oct 2002

Posts: 449

Likes: 0

From: Philadelphia, PA, USA

Code 9 on obd0 1991 crx si.....

Got a code 9......
i guess i need a new dizzy?

anyway to fix it?

Nov 25, 2003 | 01:38 PM

bryant

Member

Joined: Oct 2001

Posts: 9,019

Likes: 1

Re: Code 9 on obd0 1991 crx si..... (Sirex)

You answered your own question.

Nov 25, 2003 | 01:46 PM

USDM 4G VTEC

Honda-Tech Member

Joined: Apr 2002

Posts: 4,834

Likes: 1

From: OH

Re: Code 9 on obd0 1991 crx si..... (Sirex)

if u did MPFI swap make sure u used shielded wire and that the wires arent inverted
as on my case i have used 3 known good dizzys and i still get the code, i got shieldede wire, i hazve all soldered and have checked my wiring 10 times and still got the code.. doesnt affect my performance at all...

Dec 8, 2003 | 01:19 PM

Sirex

Thread Starter

Junior Member

Joined: Oct 2002

Posts: 449

Likes: 0

From: Philadelphia, PA, USA

Re: Code 9 on obd0 1991 crx si..... (USDM 4G VTEC)

nope i have a 1991 crx si..

Dec 8, 2003 | 01:35 PM

88DXCRX

Honda-Tech Member

Joined: Nov 2002

Posts: 2,753

Likes: 5

From: I told you to wait in the truck in Texas, United States

Re: Code 9 on obd0 1991 crx si..... (Sirex)

http://www.binghamtonlife.com/...s.htm
see: 11-52 and 11-53...

Dec 8, 2003 | 07:05 PM

Sirex

Thread Starter

Junior Member

Joined: Oct 2002

Posts: 449

Likes: 0

From: Philadelphia, PA, USA

Re: Code 9 on obd0 1991 crx si..... (88DXCRX)

i got that manual :D

Dec 8, 2003 | 09:26 PM

[626]95-GSR

Joined: Nov 2001

Posts: 1,953

Likes: 0

From: pasadena, ca, usa

Re: Code 9 on obd0 1991 crx si..... (Sirex)

ive replaced my distributor 5 different times and i still end up with this damn code..
If anyone has anything to offer for a solution, please give your input. Im positive its somewhere in the wiring harness if replacing your distributor does not solve your remedy. Otherwise, yes the problem lies within the distributor housing where the crank sensor is located.