I am considering selling my project hatch> I have never had a coupe and I think it may be time for a trunk. As the pics will tell this was a ground up build from a theft recovery 98 Silver DX hatch (thus a salvaged title, but all that was stolen was the Bseries swap/trans)







AFTER the EBP paint:









98 Civic DX Hatch
99 front end conversion(hood, headlights,fenders,grill,front bumper)
99 Tailights (red/clear)
painted Electron Blue Pearl (B95P, 99+Si blue) from Vogue sil Met.
VIS racing Carbon Fiber hood with CF underwrap
LS/VTEC (std CTR pistons, ITR rings, JDM SIR2 head+manifold+TB+tranmission)
Integra full lenght GSR radiator with dual fans
18x7.5 Racing Hart CP-035's powdercoated from winning white to semi-gloss black
** SOLD the 18's now I have brand new 17" Racing Hart CP-10's on bronze**
GSR stock header
99 SI cat+exhaust(custom fit)
Black housing headlights
CTR F.Grill
CTR F.Lip
CTR R.Lip
Carbon Fiber rear duckbill
GSR F. strut brace
Tenzo R strut brace
S200 side markers+sockets
Skunk2 extended wheel studs+Ulight lugs+Coilovers
99 "DOHC VTEC" under moldings and rear "SI" emblem
Shaved emblems, antenna, and Handles
99 Civic SI dash, Cluster, heater core, CD player, shift ****/boot,Leather steering boss center arm rest, engine wiring harness, dash harness, floor harness.
Sparco Speed seats+clubman harness

Just want to know how much I should ask for it cause I think I want to build a hybrid coupe or a JDM fronted integra..

Serious buyers/ trades/offers hit me on AIM :chrisir22 or email me

chrisir@aol.com

Modified by chrisir19 at 11:00 PM 11/25/2003


Modified by chrisir19 at 11:01 PM 11/25/2003

 

damm thats hot,got any motor pics.......

if i had my r sold i would buy it

 

edited with motor pic before the car was finished....

 

niiice

 

Very clean car. Good luck on the sale.

 

Bump for a friend! Cant wait to see what you come out with J

 

nice ride

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Stunna IDB &raquo;</TD></TR><TR><TD CLASS="quote">Bump for a friend! Cant wait to see what you come out with J</TD></TR></TABLE>

You need to come see this one b4 it's gone.... new pics soon..any one interested?

 

Sent you an email I am close enough to come get the car so email me back with the info.

 

no email for me

chrisir22@aol.com

 

how much are you wantin for it. im from ft bragg/fayetteville im interested..im kickin it in the desert but my wife could get it for me...i have a 98 coupe might trade

 

hit me on the email...

 

yo intrested in a type-r for trade?

 

Love your car man, you did such a nice job on it

 

Hey man I have emailed you like 3 times. Email me at Dusty_24@msn.com I am very interested.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMVTEC &raquo;</TD></TR><TR><TD CLASS="quote">Hey man I have emailed you like 3 times. Email me at Dusty_24@msn.com I am very interested.</TD></TR></TABLE>


sorry dude I got booted 4 a minute...

still got here and she even has a brand new engine:

b18a block bored to 81.5mm and decked
b18b crank and rods
81.5 ITR pistons/rings (made by a company called TopLine that makes exact replica pistons, coated, webbed and marked p73...the whole 9 yards so...shhh)
92 JDM SIR2 head, manifold, and cams
STR adjustable cam gears
stock valves
dual valve springs (SIR intake side, ITR exhaust side)
Ti retainers of some brand
OEM Honda b18b head gasket

To my knowledge the machine of the head was only an advisor/suggested milling to resurface it for a good seal. Plus the block had been decked for power prior to my purchase...

NEW pic from my phone:

 

DAMN!!!
Hot Hatch...
love how it looks!!!

 

well here is all the info on what I have had to purchase for this thing as is:

CHASSIS:
98 CIVIC DX HATCH. Stripped of beseries swap, fenders, rear wing..and main harness clipped by theives
SKUNK2 COILOVERS
SKUNK2 EXTENDED WHEEL STUDS w LIGHT LUGS (front only)
99 CIVIC SI OEM FRONT STRUT BRACE
99 CIVIC SI OEM FRONT CTRL ARMS. for use with a sway bar soon.
99 CIVIC CX AC BLOCK OFF
TENZO REAR STRUT BRACE. Polished
INTEGRA GSR RADIATOR. full length, lower brackets re-welded on rad support**
** hole cut like coupe prior to paint for cold air
** rear quater panels/wheel wells cut to prevent wheels from scrubbing
** holes made for OEM sturt tower brace like SI
** All sound deadening removed and repainted
** all ac lines removed.
WIRING, HARNESSES, AND ETC.
99 CIVIC SI MAIN ENGINE HARNESS. So that it was all plug and play
99 CIVIC SI MAIN DASH HARNESS. So that it was all plug and play
99 CIVIC SI MAIN FLOOR HARNESS. had to adapt to hatch rear plug (male vs. female
99 CIVIC DX ECU. Used to make jumper. plug cut soildered/heat shrunk
93 EX MAIN CAR HARNESS CLIPPING.Used to make jumper.
ENGINE
92 JDM SIR B16A swap complete from http://www.importautodsalvage.com
b18a block bored to 81.5mm and decked
b18b crank and rods
81.5 ITR pistons/rings (made by a company called TopLine that makes exact replica pistons, coated, webbed and marked p73...the whole 9 yards so...shhh)
92 JDM SIR2 head, manifold, and cams
STR adjustable cam gears
stock SIR valves
dual valve springs (SIR intake side, ITR exhaust side)
Ti retainers of some brand.
OEM Honda b18b head gasket.
HEAD was cleaned,valves reseated, and machined
99 CIVIC SI DISTRIBUTOR. To prevent having to cut and splice
99 CIVIC SI INJECTORS. To prevent having to cut and splice
99 CIVIC SI STARTER. To prevent having to cut and splice
99 CIVIC SI ALTERNATOR. To prevent having to cut and splice
**ALL BRAND NEW SEALS from top to bottom
MUGEN OIL CAP. Real I have the box from when I bought it
AEM COLD AIR INTAKE
OEM GSR HEADER
OEM SI CAT. Functioning but not currently one car
CUSTOM TEST PIPE w 02 BUNG
99 CIVIC SI OEM EXHAUST w GSR REAR MUFFLER. Till I get an APEXi N1
TRANS, AND ETC.
JDM SIR2 (non LSD) with oem flywheel and DUAL friction clutch.
STOCK AXLES
STOCK LINKAGE
TENZO SHORT SHIFT
INTERIOR
99 CIVIC SI DASH CONVERSION. Dash, heater core, inlet pipe/valve, blower motor, heater/ac main harness, heater controls, dash bezel( all from a 99 SI)
99 CIVIC SI CLUSTER. switched speedo from DX cluster for acurate mileage
99 CIVIC SI CD PLAYER
99 CIVIC SI STEERING BOSS. Leather wheel part around airbag
99 CIVIC SI SHIFT **** AND SHIFT BOOT
99 CIVIC SI CENTER CONSOLE w ARMREST
99 CIVIC SI FOG LIGHT, MIRROR, AND SUNROOF SWTICHES
99 CIVIC SI FLOOR MATS
SPARCO SPEED SEATSw SPARCO rails. Slightly faded near windows from the SUN, but red w black anti abrasion pads.
SPARCO CLUBMAN 3PT HARNESSES. Red, Brand new.
99 INTEGRA LS REAR UPPER SEATS. 98 Civic DX lower. planned to recover with LS lower seat material
EXTERIOR
99 CIVIC FRONT BUMPER
99 CIVIC FENDERS
99 CIVIC VIS CF HOOD. quater size chip in clear from rock
99 CIVIC OEM headlights (painted flat black)
99 CIVIC OEM FOG LIGHTS
99 CIVIC CTR FRONT GRILL
99 CIVIC CTR FRONT LIP
99 CIVIC CTR REAR LIP
SPOON STLYE MIRRORS. Non-power
99 CIVIC ELECTRON BLUE PEARL PAINT. B95P
SHAVED DOOR HANDLES. Since the car had been stolen before thur the door
SHAVED ANTENNA
SHAVED REAR EMBLEM
99 CIVIC SI OEM EMBLEMS AND DECALS. 2 dohc vtec, SI and CIVIC
CF REAR DUCKBILL
99 CIVIC 3DR TAILIGHTS
S2000 OEM HONDA SIDEMARKERS. sockets also

WHEELS

17x 7.5" RH Evolution CP-10's. Bronze, about 1000 miles on them
205/40/17 VISA tires. made by Falken, looks like kumho 712's

I Have way more in it but i would take about 10k OBO. Just enough to fund My coupe project, if someone where serious enough to buy it. Maybe I will put it on EBAY.

 

Just figured Id throw this out there.. I have a 96 EX coupe that Im trying to sell... Would you be interested in some sort of trade? If not, and you just want to sell your hatch, please email me at LiLgreen96@yahoo.com and let me know what kinda price youre lookin to get. Thanks!

 

I am actually looking for a coupe but the bad thing and the "hard to find" part is I want a 99 civic. I blew alot of money and alot of my time swapping dashes and parts...finding out things wouldn't work and what would to got back to the 96-98 stuff. Plus I am in love with the 99+ front end. I set down and figured up how much money I have in my hatch...and I would sell it for 10,000 OBO. Otherwise I am gonna put it on ebay.

I plan to get a 99 ex/si coupe (maybe salvaged w no motor), find an ITR swap...Paint it gunmetal, lower it, tint the windows...and maybe be done with it..

I just want a trunk lol

 

bump...

 

bump for a clean *** ek that i wanted a while back.but this ***** is too far

 

ANOTHER TICKET ****!!!!! I think i need to get out of the game

Some new pics:




Newest changes:
98 ITR block and pistons
Polished LS crank and Rods
all new seals and Bearings.
Spork valve cover (DIY) \, cause i was too lazy to order crinkle red/blk
GSR front brakes
OEM SI rear sway Bar
2000 Grey RSX type S leather seats
OEM SI airbox and Nexk

 

looks nice, ebp is nice also. I'd be interested if it had a clean title and stock motor lol gl witht your sale.

 

I think I need a Chezy trailblazer and some 22's