INSTALL: CTR side marker template... HelP!
Thread Starter
Joined: Apr 2002
Posts: 2,195
Likes: 0
From: SuR Califas, us
INSTALL: CTR side marker template... HelP!
sup guys... i was woundering if someone could help me out by posting a template of the the whole i have to make for the side marker to fit in to my EK Hatch...
something like this but for a ek...
something like this but for a ek...
Member
Joined: Jun 2003
Posts: 1,673
Likes: 0
From: Nashville, TN, USA
Re: INSTALL: CTR side marker template... HelP! (EK-TUNED)
Not quite what you want, but will probably get the job done.
https://honda-tech.com/zerothread?id=435027
https://honda-tech.com/zerothread?id=435027
Member
Joined: Jun 2003
Posts: 1,673
Likes: 0
From: Nashville, TN, USA
Re: INSTALL: CTR side marker template... HelP! (Evil_gambit33)
Do you know anyone who has them??? What I did was get a piece of paper and used the side of a crayon to make a template from my friends car. It worked really well.
Trending Topics
Honda-Tech Member
Joined: Jul 2001
Posts: 5,007
Likes: 0
From: City, State
lol, damn, its not rocket science. and it doesnt have to be down to the exact MM.
draw an imaginary line where the wheel well on your fender ends, and another line where the top of that wheel well on the fender ends.
where they intersect is your center of your marker.
draw an imaginary line where the wheel well on your fender ends, and another line where the top of that wheel well on the fender ends.
where they intersect is your center of your marker.
Honda-Tech Member
Joined: Feb 2002
Posts: 2,759
Likes: 0
From: Honolulu, USA
Re: (jonas)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jonas »</TD></TR><TR><TD CLASS="quote">lol, damn, its not rocket science. and it doesnt have to be down to the exact MM.
draw an imaginary line where the wheel well on your fender ends, and another line where the top of that wheel well on the fender ends.
where they intersect is your center of your marker.</TD></TR></TABLE>
He needs the template for the hole, not the location. (i think)
draw an imaginary line where the wheel well on your fender ends, and another line where the top of that wheel well on the fender ends.
where they intersect is your center of your marker.</TD></TR></TABLE>
He needs the template for the hole, not the location. (i think)
on me if thats what he meant. but even that shouldn't be that hard.
Joined: Jun 2003
Posts: 296
Likes: 0
From: Green Valley, NV
Re: (Evil_gambit33)
I use a manilla folder, and cut it out until the marker fits in. That's my template.
It's really not that hard, just make sure and cut slightly smaller than the template because you can alsways make the hole bigger.
It's really not that hard, just make sure and cut slightly smaller than the template because you can alsways make the hole bigger.
Re: (EK-TUNED)
Here you go, I just did mine today using these measurements
http://www.goosse.streetracing.org/photo4.html
http://www.goosse.streetracing.org/photo4.html
Honda-Tech Member
Joined: Jun 2002
Posts: 14,946
Likes: 1
From: ow my knee, CA
Re: (2000CX)
wiring is really pretty simple, you just need a positive and a negative. if you have the harness out the back of the sidemarker, just extend it out, the positive will go to the green wire and the negative will go to the black wire. These wires are all in your turn signal.
Thread
Thread Starter
Forum
Replies
Last Post
y0_calvinn
Northwest
3
Sep 20, 2011 07:58 PM
sumo
Northern California (Sales)
20
Apr 7, 2006 02:02 AM
BeeEK9R
Honda Civic / Del Sol (1992 - 2000)
3
Aug 31, 2005 08:02 PM
