Building LS/VTEC question is, is my valve-to-piston clearance safe??? HELP pls!
Thread Starter
Joined: Apr 2003
Posts: 3,315
Likes: 0
From: being tracked by FAGS Docking PERCENTAGES, GAYFUKS
Building LS/VTEC question is, is my valve-to-piston clearance safe??? HELP pls!
I'm builing a newly fresh ls/vtec and i wanted to know if i can put ctr pistons with a b16 head, would it hit or is it okay to what im building?
b18a block
crower rods
ctr stndrd size pistons
type r oil pump & water pump
acl main & rod bearings
B16 head
type r valvesprings
type r valves
skunk 2 retainers
spoon racing camshafts
Head Gasket??? OEM B16 head gasket or a different one??
b18a block
crower rods
ctr stndrd size pistons
type r oil pump & water pump
acl main & rod bearings
B16 head
type r valvesprings
type r valves
skunk 2 retainers
spoon racing camshafts
Head Gasket??? OEM B16 head gasket or a different one??
Junior Member
Joined: Nov 2001
Posts: 758
Likes: 0
From: Gresham/Corvallis, Oregon, USA
Re: Building LS/VTEC question is, is my valve-to-piston clearance safe??? HELP pls! (OnebadJdmEg6)
clay the motor since you have skunk cams.
if the clearance comes up less then .100 inch
then its to close. .100inch is what i usually aim for.
it never hurts to check
if the clearance comes up less then .100 inch
then its to close. .100inch is what i usually aim for.
it never hurts to check
Thread Starter
Joined: Apr 2003
Posts: 3,315
Likes: 0
From: being tracked by FAGS Docking PERCENTAGES, GAYFUKS
Re: Building LS/VTEC question is, is my valve-to-piston clearance safe??? HELP pls! (Dan GSR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dan GSR »</TD></TR><TR><TD CLASS="quote">B18A headgasket</TD></TR></TABLE>
Can anybody back this one up????
B18A headgastket?????
Can anybody back this one up????
B18A headgastket?????
Honda-Tech Member
Joined: Nov 2001
Posts: 2,424
Likes: 0
From: California
Re: Building LS/VTEC question is, is my valve-to-piston clearance safe??? HELP pls! (OnebadJdmEg6)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by OnebadJdmEg6 »</TD></TR><TR><TD CLASS="quote">
Can anybody back this one up????
B18A headgastket????? </TD></TR></TABLE>Yeah an LS headgasket. 
Can anybody back this one up????
B18A headgastket?????
</TD></TR></TABLE>Yeah an LS headgasket.
Mad Scientist
Joined: Nov 2002
Posts: 5,827
Likes: 1
From: tallafizzy, FL state
Re: Building LS/VTEC question is, is my valve-to-piston clearance safe??? HELP pls! (3rdGteg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 3rdGteg »</TD></TR><TR><TD CLASS="quote">Yeah an LS headgasket. </TD></TR></TABLE>
</TD></TR></TABLE>
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Bserious
Northern California (Sales)
18
Dec 11, 2005 06:46 PM
OnebadJdmEg6
All Motor / Naturally Aspirated
15
Oct 6, 2003 09:37 AM
