Just wondering if anyone could help me with my shopping list and maybe answer a few questions. I've got an ITR rear anti-roll bar on the way, endlinks and d-brackets included. My car is a 94 Ex coupe w/o a stock anti-roll bar. I know I'm going to have to swap the rear LCA's, but which ones will work, 94+ Integra and 99-00 CSi? Should I run a reinforcement kit (Beaks)? FYI, my current suspension setup is AGX/Prokit. Thanks for any help!

 

Here's everything you need in the ITR bar link:
http://www.geocities.com/bretq

I've been using BSQ's reinforcement kit with no problems, and wouldn't use a bigger sway bar without reinforcement. Not sure about the civic 96-00 LCAs but the DC will work. Might want to ask in the Civic forum.

 

That's a good writeup, thanks!

edit: it was in the autox/rr forum


Modified by RevEJ1 at 4:11 PM 9/17/2003

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Vitt1 &raquo;</TD></TR><TR><TD CLASS="quote">Might want to ask in the Civic forum.</TD></TR></TABLE>

this is the civic forum..

 

del sol rear LCA's and the beaks kit thats all u need

 

the 00si rear LCA's will work...just make sure it has a welded nut for the endlinks. But you especially want a reinforcement kit for a rear sway that large. I've hear and seen some horrific stories of subframes cracking and splitting. Beaks = goooooooood

 

I've tracked down some 94+ Integra LCAs, I can see on the pics that they are pre-drilled from the factory. I'm planning on replacing the bushings with some prothane inserts and I'll most likely cough up the dough for the Beaks kit. The last thing I want is to tear my subframe because I didn't spend $60 on a reinforcement kit. Luckily the guy I'm buying the bar from has all of the nuts, bolts, brackets, endlinks, etc. so it should be a pretty smooth install once I get everything gathered together.

How much of a difference will I notice? I'm going from != sway to 22mm