Before anyone 's me, I did a search. I just removed my gs-r spoiler and I want to cover up the holes. I remember someone listing the sizes needed to plug the holes up, but when I went to go look for the thread, I couldn't find it. Does anyone know what size plugs to use?

 

??

 

damn this search function, I can't even search for my own posts that I know I made

You could just do like I did and buy several sizes from Lowe's and find the correct ones.

But if I remember correctly you need 3 5/16" and 1 1/4" for the bolt holes, 1 3/8" for the guide pin hole, and 7/8" for the harness hole.

 

I stored it on my pc... the plug sizes from an old thread patrickgsr94 made:

(3) 3/8" plugs and (1) 5/16" plug for the bolt holes

(1) 1/2" plug for the wing guide pin hole

(1) 7/8" plug for the wire harness hole

either the 3/8 or the 5/16 was a tight fit (i dont remember). you have to get creative and pound them in or get some plugs just a tad smaller. You can find these nylon plugs at Lowes in the "hard to find" assortment drawers. Home Depot does not carry them afaik.

Once again thanks patrick.

 

Thanks PatrickGSR94 and Tilt, I was searching for hella long! I'm on my way to Lowe's today...cuz it looks cloudy.

 

i wanted to bump this thread because it has the sizes that you need. but i cannot find the plugs anywhere. i looked at home depot and the local hardware store and could not find anything to use.

where do you guys get these plugs? any place online i can order? is there an actual name for these, or are they just called "plugs"? i thought finding the sizes was going to be the difficult part, not finding the actual plugs

edit: are they similar to this?
http://www.midatlanticrubber.com/prod_6.htm