anyone heard of "Clutch specialties"?
Trending Topics
i got some for sale https://honda-tech.com/zerothread?id=595173
where did you get the clutch from and how much did you pay for it. also do you think its a good clutch for a turbo ls integra setup with about 300whp and 250-260lbs of torque
So after about 6 months of daily driving, and a couple trips to the tracks. I decided to tear it apart so I can put in an M2B4 Transmission.
This is how my Clutch Specialties HyperClutch looked like when I tore it apart. I needed to get a new clutch.
My ACT 6 Puck Clutch lasted much longer than this.


This is how my Clutch Specialties HyperClutch looked like when I tore it apart. I needed to get a new clutch.
My ACT 6 Puck Clutch lasted much longer than this.


Joined: Nov 2001
Posts: 12,498
Likes: 2
From: Newark/Bay Area, CA., USA
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JChcmax »</TD></TR><TR><TD CLASS="quote">I have their clutch setup. It's the same as ACT, just less money. Great clutch!</TD></TR></TABLE>
thats what I've also heard...my friends used to use these clutches in their drag cars.
thats what I've also heard...my friends used to use these clutches in their drag cars.
Just put a 6 puck unsprung in my turboed DA , notice that it chatters alott in 1st and 2nd gear have to rev it to 2300rpm to go. Been driving it for the 5th day now and I notice that the chattering is getting better. You basicly have to relearn to drive standard again over all the clutch is awesome. Holds my 10psi no problem.
Thread
Thread Starter
Forum
Replies
Last Post
AudioXtremes
Honda CRX / EF Civic (1988 - 1991)
5
Jul 29, 2002 04:04 PM



)


