Can some one explain why my engine is still in one piece?

Thread Tools
 
Search this Thread
 
Old Jul 16, 2003 | 08:35 AM
  #1  
mrlegoman's Avatar
Thread Starter
Honda-Tech Member
 
Joined: May 2001
Posts: 3,572
Likes: 0
From: Lynchvegas, Va, USA
Default Can some one explain why my engine is still in one piece?

Well, I found out why I have a vacuum leak
It seems that one of the bolts that holds the supercharger on came loose and fell off. The only problem was that this bolt hold the SC to the intake manifold INSIDE the intake manifold!! So I really have no idea why my engine is still in one peice. The supercharger blades are a little banged up from the bolt being thrown around everywhere. When I took the intake manifold off I found the bolt resting on top of one of the intake valves! The valves seem fine though (I'm not really sure how!). When the bolt came loose, that is what caused the vacuum leak in the gasket. I'm very very lucky. But in the process of taking the supercharger out I also destroyed my knock sensor. Autozone said their 112$, I just bought one on HT for 47$.

The blade ends are a little rough, but they still seem to make good contact.



Intake a little beat up

Only a chip on the exit blades



Modified by mrlegoman at 7:36 AM 4/22/2006


Modified by mrlegoman at 7:37 AM 4/22/2006
Reply
Old Jul 16, 2003 | 08:48 AM
  #2  
DD_JonnyLee's Avatar
Honda-Tech Member
 
Joined: Sep 2002
Posts: 1,790
Likes: 0
From: Greenville, S.C
Default Re: Can some one explain why my engine is still in one piece? (mrlegoman)

ewe , thats nasty
Reply
Old Jul 16, 2003 | 09:03 AM
  #3  
mrlegoman's Avatar
Thread Starter
Honda-Tech Member
 
Joined: May 2001
Posts: 3,572
Likes: 0
From: Lynchvegas, Va, USA
Default Re: Can some one explain why my engine is still in one piece? (TrboGSR)

I'm sure the 700 miles I drove home didn't help either
Reply
Old Jul 16, 2003 | 09:27 AM
  #4  
falcongsr's Avatar
What is this crap?
 
Joined: May 2001
Posts: 23,180
Likes: 57
From: Minneapolis, MN
Default Re: Can some one explain why my engine is still in one piece? (mrlegoman)

who assembled the SC to the manifold. you have to loctite that stuff!!!

and theres not too much of a good explanation on how you didnt grenade the engine - lucky bastard!
Reply
Old Jul 16, 2003 | 09:34 AM
  #5  
90teg's Avatar
Honda-Tech Member
 
Joined: May 2002
Posts: 962
Likes: 0
From: Virginia, usa
Default Re: Can some one explain why my engine is still in one piece? (falconGSR)

someone cares for you very much up in the sky.......
Reply
Old Jul 16, 2003 | 10:13 AM
  #6  
mrlegoman's Avatar
Thread Starter
Honda-Tech Member
 
Joined: May 2001
Posts: 3,572
Likes: 0
From: Lynchvegas, Va, USA
Default Re: Can some one explain why my engine is still in one piece? (falconGSR)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by falconGSR &raquo;</TD></TR><TR><TD CLASS="quote">who assembled the SC to the manifold. you have to loctite that stuff!!!</TD></TR></TABLE>The original owner said that the bolts were "blue" loctited....about two years ago. It was just one of those little things I overlooked when I did my check-over before hittng the track. I bought some red loctite this time.
Reply
Old Jul 16, 2003 | 10:15 AM
  #7  
1dumbscreenname's Avatar
Honda-Tech Member
 
Joined: Jun 2003
Posts: 1,887
Likes: 0
From: As far south as it gets, Fl
Default Re: Can some one explain why my engine is still in one piece? (mrlegoman)

you my friend are lucky!
Reply
Old Jul 16, 2003 | 10:15 AM
  #8  
redlinegsr's Avatar
Junior Member
 
Joined: Oct 2001
Posts: 939
Likes: 0
From: Jangalang, TX, USA
Default Re: Can some one explain why my engine is still in one piece? (mrlegoman)

so do you feel a loss in power from the baldes being beatin to death?
Reply
Old Jul 16, 2003 | 10:48 AM
  #9  
Blue-Civic-Hybrid's Avatar
Honda-Tech Member
20 Year Member
Liked
Loved
iTrader: (1)
 
Joined: Jun 2001
Posts: 3,083
Likes: 15
From: San Diego, CA.
Default Re: Can some one explain why my engine is still in one piece? (mrlegoman)

Wow..come to think of it, i wonder how my bolts are holding up.....
Reply
Old Jul 16, 2003 | 10:58 AM
  #10  
mrlegoman's Avatar
Thread Starter
Honda-Tech Member
 
Joined: May 2001
Posts: 3,572
Likes: 0
From: Lynchvegas, Va, USA
Default Re: Can some one explain why my engine is still in one piece? (redlinegsr)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by redlinegsr &raquo;</TD></TR><TR><TD CLASS="quote">so do you feel a loss in power from the baldes being beatin to death?</TD></TR></TABLE>No. After I noticed the vacuum leak I took it easy. There wasn't that big of a change or any tinking noises for me to be concerned at the time.


Modified by mrlegoman at 12:25 PM 7/16/2003
Reply
Old Jul 16, 2003 | 11:08 AM
  #11  
Tony Starks's Avatar
 
Joined: Sep 2002
Posts: 1,735
Likes: 0
From: Central, NJ
Default Re: Can some one explain why my engine is still in one piece? (mrlegoman)

With your luck, go play the lottery NOW!
Reply
Old Jul 16, 2003 | 11:21 AM
  #12  
madman604's Avatar
 
Joined: Aug 2002
Posts: 1,023
Likes: 0
From: Dude Wheres My Avatar, ItsCold
Default Re: Can some one explain why my engine is still in one piece? (Tony Starks)

god loves you...and to buy a turbo.


Modified by Turbo E at 12:46 PM 7/16/2003
Reply
Old Jul 18, 2003 | 07:58 AM
  #13  
mrlegoman's Avatar
Thread Starter
Honda-Tech Member
 
Joined: May 2001
Posts: 3,572
Likes: 0
From: Lynchvegas, Va, USA
Default Re: Can some one explain why my engine is still in one piece? (Turbo E)

I sent an email to Jackson Racing asking what they though of the situation and have not heard anything back yet
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
shovelheadache
Honda Civic (2001 - 2005)
2
Jul 30, 2012 09:19 PM
daknightfall
Tech / Misc
2
Jun 22, 2010 06:39 PM
LudeyKrus
Honda Prelude
9
Jul 7, 2003 12:41 PM




All times are GMT -8. The time now is 02:59 AM.