greddy 60mm gauges
Thread Starter
Member
Joined: May 2002
Posts: 1,522
Likes: 0
From: Arlington, TX, US
greddy 60mm gauges
how do you have these mounted? if you used a gauge pillar, which one did you use? i've got 2 that i need to mount, but as far as i can find, the autometer ones are either 52mm or 67 mm, and greddy only seems to sell a single. post pics if you have them, please!
nice steering wheel 
Yep, a dremel and some patience. Trending Topics
Honda-Tech Member
Joined: Jun 2003
Posts: 2,136
Likes: 0
Re: greddy 60mm gauges (autoEXturbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by autoEXturbo »</TD></TR><TR><TD CLASS="quote"> 
</TD></TR></TABLE>
Where did buy the cluster, i've been lookin for one like that but for EG, can find it anywhere
</TD></TR></TABLE>Where did buy the cluster, i've been lookin for one like that but for EG, can find it anywhere
Honda-Tech Member
Joined: Jan 2003
Posts: 2,878
Likes: 0
From: NC
Re: greddy 60mm gauges (Farnsrocket)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Farnsrocket »</TD></TR><TR><TD CLASS="quote">Dremel the pillar out to fit them. Took out cruise and dimmer switch for other two in dash.
</TD></TR></TABLE>
The gauges on the dash/steering column look stock! good work.
</TD></TR></TABLE>The gauges on the dash/steering column look stock! good work.
Honda-Tech Member
Joined: Aug 2002
Posts: 6,112
Likes: 0
Re: greddy 60mm gauges (Blindstuff)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Blindstuff »</TD></TR><TR><TD CLASS="quote">
Where did buy the cluster, i've been lookin for one like that but for EG, can find it anywhere</TD></TR></TABLE>
try summit racing.. got mine from there..
Where did buy the cluster, i've been lookin for one like that but for EG, can find it anywhere</TD></TR></TABLE>
try summit racing.. got mine from there..
Honda-Tech Member
Joined: Jun 2002
Posts: 5,551
Likes: 1
From: USA
Re: (HoustonSi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HoustonSi »</TD></TR><TR><TD CLASS="quote">I have 5 60mm gauges custom mounted.
</TD></TR></TABLE>
very nice... miss any gauges?
</TD></TR></TABLE>very nice... miss any gauges?
Joined: May 2002
Posts: 1,882
Likes: 1
From: FRANK THE TANK, USA
Re: greddy 60mm gauges (Blindstuff)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Blindstuff »</TD></TR><TR><TD CLASS="quote">
Where did buy the cluster, i've been lookin for one like that but for EG, can find it anywhere</TD></TR></TABLE>
I actually got it from jegs. They should have one for your car, call them and find out, it might not be in their magazine or on the web.
Where did buy the cluster, i've been lookin for one like that but for EG, can find it anywhere</TD></TR></TABLE>
I actually got it from jegs. They should have one for your car, call them and find out, it might not be in their magazine or on the web.
Joined: Jan 2002
Posts: 2,018
Likes: 1
From: North/West, IL
Re: greddy 60mm gauges (ha illuminato un)
How I mounted mine.....excuse the mess 
60mm Greddy EGT and Boost mounted in center vents, CF pod not finished yet. I have been lazy.
52mm Greddy ECT, EOP, and fuel pressure mounted in an audio console with CF plate and autometer angle rings. The WB display is temp. mounted with plexi until I get around to the next CF part batch.
60mm Greddy EGT and Boost mounted in center vents, CF pod not finished yet. I have been lazy.
52mm Greddy ECT, EOP, and fuel pressure mounted in an audio console with CF plate and autometer angle rings. The WB display is temp. mounted with plexi until I get around to the next CF part batch.
Thread
Thread Starter
Forum
Replies
Last Post
2000__GSR
Acura Integra
4
Aug 22, 2005 10:20 PM
jaymes2030
Forced Induction
5
Oct 17, 2003 06:36 AM
