as the topic says ITR suspension. ITR rear LCA's need rear sway, what else do I need to install... and do I buy a rear sway for an itr.. if i do will it fit in the gsr holes? are there any more parts needed?

end rant
tia -chris

 

search topic = BSQ or author = BSQ

It'll answer you questions quicker than I can retype it all.

 

GSR rear sway will fit with your ITR rear LCAs. I have ITR shocks/springs/LCAs and the 14mm stock rear sway. You'll be fine.

If you do purchase the ITR 22mm rear sway bar, then you'll need a BSQ/Beaks kit to reinforce the subframe. You can still use your 14mm rear sway though without any modifications.

 

The endlinks are probably different also.

 

hmm... ok .. say i just wanna get the ST rear instead of all the kit and such.. will it fit the same.. (there is no sway on the car now) I hear good things about the ST bar and can get it for relatively cheaper than the ITR swap.. just wondering if it will fit the ITR LCA's... tia

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ebelp &raquo;</TD></TR><TR><TD CLASS="quote">The endlinks are probably different also.</TD></TR></TABLE>

you can use GSR endlinks on the 22m bar. but you will deff. need to get the BSQ kit or you will rip out your subframe.

im running stock itR suspension w/ junk2's and 215 Azenis', grips like a ****!

 

and how do you figure the ST bar is cheaper? it'll cost you abot a $170 for the itR bar w/ endlinks and the BSQ kit, and it's a 100X's better than the ST bar, imo!

 

ITR LCA's bolt up similarly to the gs-r ones. Everything will work fine other than your shocks.

As for a rear swaybar, stick with the ITR or JDM ITR unit along with a good reinforcement kit (BSQ or Beaks).

 

I can get it for 139 thats how i figure its cheaper.. just want to know if it will work

 

actually.. hmm the ST is only 19.05 mm (3/4 inch) that makes scence I will probably go with the itr bar and BSQ

thanks all -Chris