I know you can use the stock ls rods in a d series, so would it be possible to use Eagle H-beams sold a LS rods in a D series?

 

Yes, but you'll have to notch the block significantly and I wouldn't advise it since the rods are of similar strength.

 

Still Wanna Buy a d16a6? Ive got one for sale thats mint, with trannytoo. contact me at firesonfours@hotmail.com

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 88ZCRX &raquo;</TD></TR><TR><TD CLASS="quote">I know you can use the stock ls rods in a d series, so would it be possible to use Eagle H-beams sold a LS rods in a D series?</TD></TR></TABLE>

The LS rods will need some work done to them for it to work.

You can just buy my LS rods all machined and bushed for a D16 (arp rod bolts + acl bearings) for $200shipped.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jared &raquo;</TD></TR><TR><TD CLASS="quote">Yes, but you'll have to notch the block significantly and I wouldn't advise it since the rods are of similar strength.</TD></TR></TABLE>

I was just wondering if there is any significant difference between the eagles for d16s and b18s. My friend has a set of eagle b18 rods that he would sell to me real cheap. I already knew I was going to have to notch the block for either set.

 

ok well eagles is a different story...for the most part d16 and b18 Eagle rods are the same strength however, just like stock LS rods you will have to get them machined to fit the stock d16 crank.

you might consider this, that the shops i've talked to quote me about $150 to get them machined...now is your friends price for the LS Eagles + $150 still cheaper than the price for a new set of d16 eagles???

 

or just buy them and sell them and use the money to get the d16 ones? no worries.

 

how can i get ahold of you to buy your ls rod