ITS SOLD



used for only 3 months, in perfect condition, comes with everything needed to instal on a D series motor.
Included is JRSC FMU, 8lb pulley, 6lb pulley, 1 new belt, and light crank pulley.
There is approximately 10k + or - on the supercharger, and it woks perfect no noises at all. It is no longer on the car.
I am selling it because I need the money and want a stock motor for now.

If you do not intend on purchasing the supercharger please do not email or call me.
The best way to communicate is to call me.
I have had too many flakey buyers in the past.
Thanks!
Nate
greenstang50@yahoo.com
Cell: (336)255-8236



Modified by stupid fast 5.0 at 9:31 AM 6/15/2003

 

What's your HP @ the wheels with the JRSC? What pulley are you running 6lb or 8lb?

 

Yes id also like to know what ur HP is and TQ... Price???????

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMlifestyle &raquo;</TD></TR><TR><TD CLASS="quote">Jackson Racing supercharger $1200 shipped to lower 48 ???????</TD></TR></TABLE>

I never put it on the dyno but I really wanted too. dseries.org those guys put down around 180+- with a vtec head. You can make really good power if your combination is right, or you can just bolt it on and instantly feel like a different motor. I wish I had the time and the money to see what the most power I could get on a dyno with 8psi would be. A small shot of N20 would do amazing things for a JRSC 15-20 shot. (intercooler affect) I would love to see it tested.


Modified by stupid fast 5.0 at 4:51 PM 6/8/2003

 

i have seen a guy run 13.7 on the 1/4 in a 91 crx si, with complete interior and sound system in the trunk! this is a good buy, get it while is hot!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by smokey2.0 &raquo;</TD></TR><TR><TD CLASS="quote">i have seen a guy run 13.7 on the 1/4 in a 91 crx si, with complete interior and sound system in the trunk! this is a good buy, get it while is hot!</TD></TR></TABLE>

Thanks smokey2.0 I really wish I could of went to the track when it was installed. I would love to know what it would of ran with my setup. (unfortunately the car was wrecked before I could)
Nate

 

does it fit all D-series engines?

 

damn.. tempting. Bump for a good price!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Panda EK &raquo;</TD></TR><TR><TD CLASS="quote">damn.. tempting. Bump for a good price!</TD></TR></TABLE>

Yes it will fit all D series motors, Jackson Racing only includes a few small things that are different in the kits however I have the parts for any D series. I can walk you through any part of instalation on this.
Thanks!
Nate

 

will it fit a DOHC ZC?

 

damn it, if only i had the money. free bump

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Panda EK &raquo;</TD></TR><TR><TD CLASS="quote">will it fit a DOHC ZC?</TD></TR></TABLE>
Yep it will fit a DOHC ZC and man oh man would I love to drive a supercharged ZC hatch.... AHHH that would be sweet

 

I had JRSC w/ 6 psi pulley on my 96 Civic EX. It put out 140 HP & 120 TQ @ wheels on dyno. This was on typical hot & humid day in South Florida. I had DC header & Tanabe exhaust on car.

Kit is slightly different between D16Z6 & D16Y8, probably because of OBD issues. When I ordered SC, Jackson sent me kit for 92-95 Civics. My mechanic had to call @ request additional parts & proper instructions.

I hope this helps out those of you that are interested.


----- Antony

 

Thanks for the reply Ant-man yeah thats about what people see stock with 6psi. I do have the extra fpr mounting plate and throttle cable bracket for both kits. Once agian for any D series I can walk you through the instal. Its not hard at all if you have any common Honda knowledge.

Nate

 

WAHOOO I just got off work its time
cheers

 

Good Morning HT

 

 

bump

 

up up and away

 

Does anyone want this before I use it for my boat anchor!!!

 

Give it to me before you use it as a boat anchor dawg lmao !!! May be interested in it what's the cheapest you'd let it go for ? Need any part's in trade ? Thank's alot 4 your time !

 

whats the minimum your asking? does it also come with tthe injectors?

 

Bump y0, for a good deal...

I'm selling everthing I own, do you still have it? (Except the ZEX, 8lbs and a 75 shot, 11's here I come )

are you in western North Carolina?

 

ITS SOLD NOW thanks honda-tech

Nate


Modified by stupid fast 5.0 at 9:32 AM 6/15/2003