I think some of you had a question about Corey's front set up. Here are a couple of pictures, Corey can answer your questions.


Left Front



Right Front





Modified by SMSP at 9:35 PM 6/3/2003

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SMSP &raquo;</TD></TR><TR><TD CLASS="quote">Right Right
</TD></TR></TABLE>

lol..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Birdman. &raquo;</TD></TR><TR><TD CLASS="quote">

Right Right</TD></TR></TABLE>

Thanks....Corrected...........I think I need some sleep.

 

Damn those are small.

 

Dave, it was the preludeonline board that needed the pics

 

Corey would you like to provide some insight on how exactly you go about getting custom rated springs.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RAB &raquo;</TD></TR><TR><TD CLASS="quote">Corey would you like to provide some insight on how exactly you go about getting custom rated springs.</TD></TR></TABLE>

assuming you have coilover sleeves:

http://www.ground-control.com/gcers250.htm

$55 ea, plus shipping

 

When you order Ground Controls from an authorized GC distributor, you can specify any spring rate you want. It does not cost any extra. If you already have GCs and want different spring rates, contact GC or an authorized GC distributor like del_parker said.

Andrew

 

Really that easy. DAMN and to think that I was toying around with spring and shock forever, I should just get some GC and Konis. DUH

 

Are you asking how to figure out what rates you need, or just where to get some?

[EDIT: Corey, it looks like the springs are nowhere near to top seat... how short are those springs? (the pics were taken at full droop right?)]

 

Suspension is at full drop, w/ NO swaybar and sphercial bearings in the radious rods.. It drooops really far down, and those are 6" front springs..