Im making my own earthing kit, and would like to know what points to run the wires from the NEG batt terminal to? So far i have the TB and Intake and vtec solenoid, but what other locations do the earthing kits run to? Any help appreciated.

 

are you talking about a grounding mod? ( ITS NOT EARTHING KIT ) just look at the engine and if you see a wire comming off your engine and connecting to your body thats a GROUND its not hard to see them, there is 1 on your valve cover just look and you will find your GROUNDING points im also tryin to GRIND in GROUNDING MOD into your head so you dont make that mistake again

 

back side of head on driver side next to intake manifold and below valve cover. You will see a threaded opening to except a 14mm head bolt. That's a place I use also.

I used....vtec selenoid, throttle body, intake manifold, and the head, along with the factory grounding cables

 

hey i sent you pics of the spots one of those kits tells you ground

 

heres a big EFin thread about it. HTH.

 

Hey thanks for the pics. Its kinda hard to understand chinese or japanese or whatever it is written in.

I already did the ground wire upgrade from all the points like valve cover to chasis, and tranny to chasis and NEG post to chasis etc.

But i keep seeing these hyper ground kits on ebay that have a central point that connect to your battery and have wires that go to diff places on the engine, thats what im talking about.

thanks.

 

yeah HKS makes them they are the best way to ground them, instead of going to the body go strait to the battery best results

 

do you know the locations of the HKS kit?

 

The Spoon kit uses the VTEC solenoid, the alternator, the head, and the intake manifold.