thinking about getting an ecu chip to eliminate my 2nd O2 sensor. i want to avoid any programs that advance the timing too drastically, any suggestions?

my setup is: B16, CTR cams, GSR throttle body, APEX header, VAFC, FPR, test pipe, old school tanabe hyper medallion exhaust.

 

http://www.locashracing.com can help you out

 

http://www.hyperducktuning.com the Mugen N1 program, Steve if you're ordering call me, I want in on it too.

 

http://www.ericksracing.com

 

zdyne or the mugen program are the only ecu's avalible that will eliminate the 2nd 02

 

Steve, Adrian at hyperduck has your choice of (2) chips, shipped with all the stuff needed to do the chipping for $35. Call me up if you're getting one because I want one too (insert rant about passwordjdm giving me an auto ecu).

 

i think i am going to do it. will they take credit card payment on their website, and how many are needed to get that price?

 

i could make you one with stock timing if you want.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2ndhandCRX &raquo;</TD></TR><TR><TD CLASS="quote">i think i am going to do it. will they take credit card payment on their website, and how many are needed to get that price?</TD></TR></TABLE>

Adrian's price is $35 shipped, you get the socket you have to solder in and your choice of two chips that you can switch at any time. I'm suprised he hasn't responded to this yet.

 

try a hondata setup
http://www.hondata.com

 

i can send you guys 4 chips and the 2 sockets to put them in with for $25 shiped if you guys want. i do can do trades and feel free to low ball me too(i'm not in it for money, i'm a local on the pgfmi forum that is down to hook brothers up.).

 

Steve, I can pick up the bill on this if you want, we already know I owe you big

 

that would be great, thanks. i would like to get one program that is set up for a stock b16 bottom end with ctr cams, head porting, gsr throttle body, and I/H/E.

the second program would be the same thing, set up to run ctr pistons as well, and a skunk2 manifold.

 

Hey EvilXKid I'm interested in your offer. Hit me up on this deal or e-mail.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2ndhandCRX &raquo;</TD></TR><TR><TD CLASS="quote">that would be great, thanks. i would like to get one program that is set up for a stock b16 bottom end with ctr cams, head porting, gsr throttle body, and I/H/E.

the second program would be the same thing, set up to run ctr pistons as well, and a skunk2 manifold.</TD></TR></TABLE>

I don't know if you can get that detailed, but we'll see what evilkid says. I'll take the Mugen N1 and any chip you have that might help out with my up coming turbo. We both are PR3s.