did a search on this and got nothing...anyone know wat the dimension and measurement are of where to put the sidemarkers on the fender?...just making sure, i don't want no retarded looking sidemarkers

 

havent tried it but i hope it helps.

http://students.washington.edu...e.jpg

 

i know your is an ek but i have been told it is the same. take it for what its worth good luck...

 

If that is the 92-95 then the ek is different. The center of the side marker is exactly centered w/ the wheel well axis's. If you were to draw a line out from the top and side of the wheel well the contact point is the center of the side marker. Sorry but I don't have a diagram.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Takeoff &raquo;</TD></TR><TR><TD CLASS="quote">If that is the 92-95 then the ek is different. The center of the side marker is exactly centered w/ the wheel well axis's. If you were to draw a line out from the top and side of the wheel well the contact point is the center of the side marker. Sorry but I don't have a diagram.</TD></TR></TABLE>

I will see about getting a picture of my fender and work on a diagram for this. Good information, thank you.

 

search guys, i made a thread like this a while ago.

where it goes-




like my art?

 

of all the topics on this subject almost everyone wants to know the cutout shape

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TURSpoonEK &raquo;</TD></TR><TR><TD CLASS="quote">of all the topics on this subject almost everyone wants to know the cutout shape</TD></TR></TABLE>

you find that out on your own.

you fine tune the cutout on a peice of cardboard, then transfer the design onto the fender.

 

thanks a lot everyone..this should help a lot