Will a set of seats out of a 95 - 00 integra bolt right into an 88 CRX? If not how much modification would I be looking at to make it fit? Thanks for the help.

 

no they won't bolt right in


use your stock rails and then make some custom brackets to attach the rails to the integra seats
thats how i did it with my crx seats. good luck

 

Drill a second hole of equal size above the the rear inner bracket on each seat so that you now have a set of holes that looks like an 8(remember that you need this on the rear inner bracket location "only"). Thats all I need to fit 97 leather into my sedan. It does take a little muscle to get the brackets lined up but my seats slide straight and have worked for about 3/4 of a year just fine.

 

One more question: Will 91 CRX Si seats bolt right into an 88 CRX DX? It seems like they would but I am not sure?

Thanks again for the info.

 

I beleive the 88'-89' seat brackets were slightly different from the 90'-91's.
You may be able to swap the brackets from the bottoms of the seats though.

 

yeahthat.

 

Try swapping the whole lower pan(that way youre brackets are sure to mount up) You also may need to swap the side levers

Ive seen GSR leathers in a crx and thats what the guy had to do

 

Eraser is right, a friend of mine did that same interior swap and he said that he swapped out the whole underside and then there was nothing else to worry about. He said something about the rail need a new bolt hole drilled in it but it took him only and hour or so to do, so for what it's worth...