Alright, i am ordering a ton of parts for my teg...now i want to put on a skunk2 manifold and i was told i need a type r throttle bracket and a typre r throttle cable...now when i go to http://www.acuraautomotivepart...PEDAL I see all the throttle cables..now it is the cable #10 correct for the whole setup correct...now when i go back to the gsr page the both have the same part #'s whats the deal...can i use my gsr cable>?

 

gsr and type r both have the same throttle cable and any ways dont you knoe that the throttle cable is adjustable

 

thats what i was pretty sure of...i just need the bracket for the skunk2 and the ls throttle body springer...thanks

 

no they are not the same. the itr throttle cable part # is: 17910-SK7-AO3

 

ITR throttle cable is shorter than GS-R...
you need ITR throttle cable, bracket and pulley

stan

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Flamenco-T &raquo;</TD></TR><TR><TD CLASS="quote">ITR throttle cable is shorter than GS-R...
you need ITR throttle cable, bracket and pulley

stan
</TD></TR></TABLE>

Correct.

 

You don't need to switch out all that stuff. The gsr cable and bracket will work fine you just won't be able to fit a strut bar over it and it looks funny. I made a throttle bracket in aobut 10 minutes so I wouldn't have to buy and switch all the parts and this clears all strut bars. fyi

 

are u guys kidding, a cable's a cable is a cable, save your money and learn how to feather.