does anybody have any pics of setups with these? particularly with a dseries setup on an ek.

 

not the greatest pic, and not an ek, but u get the idea



EDIT: this is the only pic i have on my computer and no. it doesnt touch the tire nor does it ever come in contact while turning. the angle just looks weird there.


[Modified by Pengo, 12:12 PM 3/24/2003]

 

sleeper

 

Thats a pretty nice sleeper set up. What kind of intercooler did you use?

 

nice . Is that a dsm intercooler? How did you rig it up and do you think it gets a good amount of air flowing to it?

anyone else got some pics?

 

Looks like a DSM intercooler on a DSM.

 

thats on his del sol i think...

 

ZC= D Series on a EF Civic

 

yup dsm 1g on my sol. once u have the smic and ur sittin there lookin at it and lookin at ur car, u'll figure out how to put it. just gotta be creative and willin to get ur hands a lil dirty. i think they should flow fine since i've seen some dsm pushin some pretty high boost and still running side mounts. that EF is prob gettin even more air in there than me

 

My bad, didnt mean to insult you like that.

 

nah its cool.

yea i dropped only about .5 psi after the install, and for $30 i can't complain since it does its job

 

shouldn't you put a heavy gauge wire mesh on the intercooler to protect it from large rocks or debris from damaging the intercooler fins?

nice setup and looks very efficient.

 

nice hatch

 

anyone want a 1g dsm sidemount PM me, 30 bucks takes it...

 

you mean around the whole thing or the front? there is a mesh grille on the front in all three vents in the bumper. its just black so you cant see it.

 

I was able to put the lining back in the wheel well after I installed the IC but had to trim it a bit. I then drilled some holes in the lining so the air would flow through the IC, "I think the wheel causes a suction effect to pulling air out."

 

Thats nice.

 

does anybody have pics of a supra side mount intercooler mounted as a fmic?


[Modified by SOHC_MShue, 10:50 AM 3/26/2003]

 

ok im ganna be running a turbo coupe intercooler the same place u guys are running your dsm intercoolers. im putting it on a 92 sedan. only thing is their is no air duct like on the other cars. will this be a problem? also can i just use dryer duct to channel the air through the intercooler? or amd i ganna need to make a hole in the bumper. thanks

 

testfit pics from a while ago...

 

what about the 93-up supra side mount? Anyone ever use that

 

nice alan

block out ur plate tho in the pics. Your back @ School?

 

back from the dead!

 

shazam!

 

uh oh I see someone is finally boosted

I wish I had a pic of what I did but I went to home depot and got some plastic black mesh pet screen and cut a square in the splashguard and ziptied it in. Can't even tell there's a cutout there for an ic unless you look really close.