Can you calculate my new compression ratio after getting my head milled?
Thread Starter
Joined: Jan 2002
Posts: 640
Likes: 0
From: NF, Canada, Canada
Can you calculate my new compression ratio after getting my head milled?
I had 8.5:1 compression. I had my head milled with 0.010 removed.
Can any one estimate what my new compression is?
Can any one estimate what my new compression is?
Thread Starter
Joined: Jan 2002
Posts: 640
Likes: 0
From: NF, Canada, Canada
Re: Can you calculate my new compression ratio after getting my head milled? (xThexHeadx)
Z6 block with Y8 head, my Arias pistons give me 8.5:1 compression ratio with that head/block combo.
So with the head milled 0.010 over, then my final compression is.....................................?
So with the head milled 0.010 over, then my final compression is.....................................?
Joined: Sep 2002
Posts: 560
Likes: 0
From: This is the Vtec Monster from, HELL, U.S.A
Re: Can you calculate my new compression ratio after getting my head milled? (AzSi22)
Trending Topics
Re: Can you calculate my new compression ratio after getting my head milled? (Hybrid)
Just curious, not trying to start anything. Why did you get low CR pistons and then get your head milled to raise the compression?
Member
Joined: Feb 2002
Posts: 1,867
Likes: 1
From: T Town, G35Land
Re: Can you calculate my new compression ratio after getting my head milled? (slomofo)
Just curious, not trying to start anything. Why did you get low CR pistons and then get your head milled to raise the compression?
Thread Starter
Joined: Jan 2002
Posts: 640
Likes: 0
From: NF, Canada, Canada
Re: Can you calculate my new compression ratio after getting my head milled? (AzSi22)
I blew the damn motor and damaged the head. Put it back together, realized this afterwords. Its winter here, so I have the car in peices. The head is not ready to go back on.
Thread
Thread Starter
Forum
Replies
Last Post
candy eg
All Motor / Naturally Aspirated
5
Jun 28, 2006 01:38 PM
Techna600f4i
Honda Prelude
8
Jun 19, 2006 11:49 PM
Mentat Ghola
All Motor / Naturally Aspirated
14
May 11, 2004 02:35 PM
