bolt-on?
for 92-00 civic hatch?
tia

 

not bolt-on, but a muffler shop can modify it to make it work.

 

what kind of modification?

 

I believe you have to shorten it.

 

the tip only right?
but it'll bolton, and the hangers will fit without any mods right?

 

?

 

I had an ITR muffler for a little bit, but I sold it because it was going to be too much of a hastle for me to get it to fit on my 5th gen hatch. It didn't want to sit in the hangars right, and the muffler itself seemed to be a really tight fit to be behind the bumper. Like the cannister would be butted right against the bumper, and the tip would be sticking way out. So, I am positive it can be done, you are probably just gonna have to do some hacking.

 

it can be done i have "chugger" 's old itr muffler that he had on his eg hatch,

 

get a CTR muffler, fits perfect

 

actually i'm the one selling the muffler
thx

 

Ah, in that case, I am thinking that the itr muffler might fit better on coupes. If I remember correctly coupes had a little longer axle back section than hatches.

 

but it'll "fit" with no mods?

 

The ITR muffler should fit the 92-00 coupes. I had an integra ls stock muffler that bolted up to my 96 coupe's piping. Only problem was the tip came up a tad bit short. It looked fine, just the bumper picked up much of the exhaust soot.


[Modified by powerBan.est1990, 8:32 PM 2/13/2003]

 

i know the itr muffler will fit on coupe/sedans
but i need to know about the hatches, bolt-on with no modifications?

 

no. you will have to take it to an exhaust shop and have them shorten the pipe between the axle and the canister. it shouldn't cost much. and you might want to shorten the tip a little on a HB.

 

http://www.hondaracing.ca/installs/t...aust/index.htm here is how to do it

 

thx