will it bolt up ? are the trailing arms the same ? need help asap

 

i thought that only the older style teg assemblies would fit; but i could be wrong(?)

 

ttt

 

use integra 90-93. . .

derek

 

Its the same parts, cables, calipers and trailing arms are all the same. I put a set from 95 GS-R and worked/fit perfectly

 

Yeah right. Bolt-on job. All the parts are the same, except the clips of the cables. The cables are maybe the sames...but not the clips, but it's easy to arrange that.

 

clips what clips?? The one that go on the chassis for the e-brake cable or the Clips that hold the brake hoses on. To tell you the truth the worst part about this swap is the brackets that hold the e-brake cables prepare to cuss alot and spend tooooo much time on the passenger side.

 

would everything work off from a 90 teg 4dr and if so what do i need the whole assembly? and they will just bolt right on to a 91 hatch?

 

thx for your help guys you have been a great help . i love this place

 

the 95 rear brakes will work fine, just have to replace the e-brake cable

 

Truthfully I'm unsure about the 4dr cables. I've always used 2 doors from 90-93 or with the other set up it was a GS-R 2 dr also. Sorry I cann't help with that part

 

are the e brake cables the only thing that wont fit off form a 4dr. because i will go get the rest of the stuff and then hunt up a set of ebrake cables from a 2 door. they have a 4dr teg up to my local junkyard i can probally get all the parts for like 50 bucks. another thing arent the teg front brakes bigger? what all do i need to change my fronts brakes on my hatch to the bigger rotors on the teg......rotor caliper hub?

thanks alot
brandon

 

it should fit with mixing and matching parts from your existing setup