Turn Signal Problem After Momo Install
Last night, I took my OEM steering wheel off and replaced it with a Momo steering wheel. Everything is great, except one problem.
When I make a turn, and use the turn signal, the turn signal does not shut off automatically when I start going straight again. It keeps blinking. Has anyone had this problem before? Any suggestions to fixing this?
Also, I haven't figured out how to get the horn to work, but I think I've got some ideas on that problem.
Thanks!
When I make a turn, and use the turn signal, the turn signal does not shut off automatically when I start going straight again. It keeps blinking. Has anyone had this problem before? Any suggestions to fixing this?
Also, I haven't figured out how to get the horn to work, but I think I've got some ideas on that problem.
Thanks!
it stops blinking once you flick the lever again though, right?
I don't have experience installing steering wheels (mine's still stock), but maybe there's some type of lever on the OEM wheel that flicks the turn signal lever so the light stops blinking once you continue driving straight. Just an idea. . . .
I don't have experience installing steering wheels (mine's still stock), but maybe there's some type of lever on the OEM wheel that flicks the turn signal lever so the light stops blinking once you continue driving straight. Just an idea. . . .
Yup. I'm running into problems when I straighten the wheel out..the turn signal still stays on. Yes, it does go back after I flick it back.. otherwise, it'll keep blinking.
When you take off the bolt, underneath there is one white plastic molding comes out. I can't put that part back in because the steering wheel hub won't fit with it on.
[Modified by Mocky57, 6:12 PM 1/23/2003]
When you take off the bolt, underneath there is one white plastic molding comes out. I can't put that part back in because the steering wheel hub won't fit with it on.
[Modified by Mocky57, 6:12 PM 1/23/2003]
the hub isnt engaging the canceller.
Trending Topics
that plastic ring is the canceler, it tells the turnsignal when to turn off in relation to steering wheel position. I did a Momo on my 97, no problems, even have a working horn...all you need is part number 35259-SH3-A02 for 88-91 civics, there was a post just today on making the horn work, search...if your hub won't fit properly, you may be using the wrong hub...good luck
actually, lucky you, - here's the link https://honda-tech.com/zerothread?id=273474
[Modified by RSZero1, 4:46 PM 1/23/2003]
actually, lucky you, - here's the link https://honda-tech.com/zerothread?id=273474
[Modified by RSZero1, 4:46 PM 1/23/2003]
my 1994 civic ex turn signals automatically turns off when i straighten out my wheel, but my cousins 2000 accord ex turn signals have to be shut off manually.
[Modified by ejprimo, 9:58 AM 3/11/2003]
Thread
Thread Starter
Forum
Replies
Last Post
jdmjeff
Acura Integra
5
Jun 30, 2005 07:00 PM




