i put this diagram togather if any one needs it. if you see any problums just shout and i'll fix them.


ps: this is for converting dx wiring to si.



[Modified by evilxkid, 12:19 PM 1/16/2003]

 

dude thats awsome! make this a stickey!

Blaze

 

i say... get rid of all that freaking evil auto or havok or whatever... makes the diagram mroe dificult to read, specially if u are using as a referal and dont know waht u doing.. if u want people to know its urs just put evilkid on top or something..
othat than that its a well done job.. and thanxs.. just make it more simple and easy on the eyes...

 

I'd say keep it the way you want it...Anyone who wants to use it should just appreciate the effort you made. Although I agree with the unnecessary "Havoc" background.

 

Very nice!!!! I agree with simplifying the background, also, you can't see the white wire, perhaps an outline around it for clarity.

Otherwise, great job!!!

 

i cleaned it up a bit.
[Modified by shortyz, 10:04 PM 1/15/2003]


[Modified by shortyz, 10:05 PM 1/15/2003]

 

Dont forget to swap the outer TPS wires, and extend the IACV wires to reach the back of the manifold as well.

 

that looks better, but put evilxkid's name on it somewhere to give him props for his work.

 

is the injector thing right i thought you only needed pin 3 and 5 for the injectors...

 

accually, i believe it's #3 & 7, those are the ones you add, but pins 1 and 5 you're stealing from the old injectors, so it's nice to see where they go.


[Modified by thumpu77, 11:02 PM 1/15/2003]

 

i just got doing a DX to SI on my DX, waht a pain in the ***, LOL but worth it

 

Very nice! I wish I had that to go by the the "Kenji" information. It took me forever to figure it out.

 

sweet! nice work