any one got the instructions to do the rear camber for a crx??? i know i saw a pic of the install a while back but i cant find it anymore. if anyone has it can you please post...thanx

 

you buy two longer bolts and washers on each side for the upper control arm
put washers in, corrects camber positively, take some out corrects negatively

 

anyone got pics? i would like to see

 

i know how to do the rear,. i will like to know about a home made camber kit for the front... thats where most of the wear is!

 

Strongly advise that you do NOT even try doing the front without using kits from Specialty, Ingalls or Progress. The setup in the front is very different from the rear.

 

i know someone out there has a pic becuase i printed it out a while back but i cant find it anymore...PLEASE POST

 

take the bolts off your upper control arm in the rear.. put longer ones with washers (number of washers (thickness) depends on how much correction you need)

if you can't figure that out.. you shouldn't be messing with your suspension geometry

 

i know how to do it...all i wanna see is how it looks thats all

 

does anyone have that diagram???

 

http://jdmfan.com/technical/suspension/rear_camber/

 

good site.

 

any pics

 

http://home.earthlink.net/~civ....html

 

why did you bump a 2 year old thread