Fully Built B18A Turbo swap
At this time, I am interested in offers for this entire engine swap. Feel free to make offers on short block, head/IM/TB, Turbo Parts. I may possibly part out at a later time. Shipping is an option, but would preffer local. All aftermarket parts are new except intercooler. I bought the entire project car from someone that was in need of $$
B18A Block standard bore
Areis pistons (8.5:1)
Eagle rods
stock crank
STR Block Gaurd - machined fit, not welded
STR cam seal
Underdrive crank pully
Ported and polished head ($300 under table job)
Valve job done on valves
Ported and Polished intake
Ported throttle body by proflowdesign
Crower cams 6042t turbo
Crower springs
Crower retainers
MSD 6a box
MSD Cap
MSD coil
MSD wires
RC 550 peak/hold injectors resitor box
AEM Fuel pressure regulator
Walbro 255lph fuel pump
---------------------------------
Turbo Parts - needs flange, B pipe, intercooler piping, Tbody->turbo pipe
---------------------------------
Turbo exhaust manifold
T03/04e turbo (Garret) AR .50 /AR .48
Tial waste gate
Blitz Blow off valve
Intercooler
---------------------------------
LS tranny - resurfaced flywheel, brand new stage 3 clutch from eclutchmaster
Axles, ECU, Shift Linkage
EDIT:
The Turbo has a little gasket sealer on it .. but its Brand new
The Turbo exhaust manifold has been ported to match up with the head, so unfortunately I can not sell this piece seperate fellas
http://members.aol.com/iateyourcivic...page/turbo.jpg
http://members.aol.com/iateyourcivic...e//B18A_EM.jpg
http://members.aol.com/iateyourcivic...e//B18A_TB.jpg
http://members.aol.com/iateyourcivic...B18A_port1.jpg
http://members.aol.com/iateyourcivic...B18A_port2.jpg
ill try and get pics of the cam gears and unorthodox underdive pulley tommorrow
[Modified by zilverz, 3:59 AM 9/30/2002]
[Modified by zilverz, 6:04 AM 9/30/2002]
[Modified by zilverz, 2:58 PM 9/30/2002]
B18A Block standard bore
Areis pistons (8.5:1)
Eagle rods
stock crank
STR Block Gaurd - machined fit, not welded
STR cam seal
Underdrive crank pully
Ported and polished head ($300 under table job)
Valve job done on valves
Ported and Polished intake
Ported throttle body by proflowdesign
Crower cams 6042t turbo
Crower springs
Crower retainers
MSD 6a box
MSD Cap
MSD coil
MSD wires
RC 550 peak/hold injectors resitor box
AEM Fuel pressure regulator
Walbro 255lph fuel pump
---------------------------------
Turbo Parts - needs flange, B pipe, intercooler piping, Tbody->turbo pipe
---------------------------------
Turbo exhaust manifold
T03/04e turbo (Garret) AR .50 /AR .48
Tial waste gate
Blitz Blow off valve
Intercooler
---------------------------------
LS tranny - resurfaced flywheel, brand new stage 3 clutch from eclutchmaster
Axles, ECU, Shift Linkage
EDIT:
The Turbo has a little gasket sealer on it .. but its Brand new
The Turbo exhaust manifold has been ported to match up with the head, so unfortunately I can not sell this piece seperate fellas
http://members.aol.com/iateyourcivic...page/turbo.jpg
http://members.aol.com/iateyourcivic...e//B18A_EM.jpg
http://members.aol.com/iateyourcivic...e//B18A_TB.jpg
http://members.aol.com/iateyourcivic...B18A_port1.jpg
http://members.aol.com/iateyourcivic...B18A_port2.jpg
ill try and get pics of the cam gears and unorthodox underdive pulley tommorrow
[Modified by zilverz, 3:59 AM 9/30/2002]
[Modified by zilverz, 6:04 AM 9/30/2002]
[Modified by zilverz, 2:58 PM 9/30/2002]
umm im gonna let this post sit for a bit .. see if i have anyone interested in the whole swap... but if i part out .. ahh prob about 110+ship its brand new clear/silver color
how much for the whole swap? VERY interested. if you can email me a price at bdizzle13@msn.com thatd be great. Practically the same exact setup that i was going to buy next week! maybe i can get a bit of a discount because of what it needs and is missing
haha thanx man
haha thanx man
Thread
Thread Starter
Forum
Replies
Last Post
Bulldogg83
Classifieds: Forced Induction
21
Sep 30, 2004 11:34 AM
cnydelSolHybrid
Forced Induction
6
Jun 25, 2003 02:53 PM




