its a first gen b16. i thought it was usually inline with where the breather hose goes from the valvecover to the intake. i dont see it. yes i did a search btw

thanks

 

Underneath the fuel rail on the Intake manifold.

 

thanks!

 

Does anyone have a picture or diagram of the location of the PCV valve? Thanks.




[Modified by T~Rex, 5:48 PM 1/27/2003]

 

 

The acutal PCV will be located in the intake manifold... Trace the line down off the intake manifolds plenum till right where it goes flush with the runners... You'll see a little 90 degree plastic piece.... That's ur PCV valve.... Good Luck

 

What pvc valve are you guys replacing the stock b16a1 valve with?

 

I'm pretty sure the B16A2 valve will work.

 

Is aftermarket OK, or do I need to use an OEM Honda one?

 

Just about any pvc valve can be modified to fit, but which has the corrrect flow rate?(if it can be called that) I think this question can only be anwsered by a qualified honda technison*.

 

I would just go with OE, they're not that expensive anyways... Latez