Optimal Tire Pressure for Azenis?
#1
New User
Thread Starter
Join Date: Aug 2001
Location: In the R we trust,, NJ, united states
Posts: 2,808
Likes: 0
Received 0 Likes
on
0 Posts
Optimal Tire Pressure for Azenis?
like the topic states. i know alot more of you use them or used to use them as opposed to guys in the integra forum.
TIA
Just for regular street use BTW..........
TIA
Just for regular street use BTW..........
#6
big strong guy
Join Date: Feb 2002
Location: LUTZ, fl, usa
Posts: 3,455
Likes: 0
Received 0 Likes
on
0 Posts
Re: Optimal Tire Pressure for Azenis? (Ddub)
why does everyone raise pressure for track? or auto x? less air = more traction
i use 35psi street, and around 28 front/30rear for auto x! eric
i use 35psi street, and around 28 front/30rear for auto x! eric
#7
Re: Optimal Tire Pressure for Azenis? (rainmanEK)
why does everyone raise pressure for track? or auto x? less air = more traction
i use 35psi street, and around 28 front/30rear for auto x! eric
i use 35psi street, and around 28 front/30rear for auto x! eric
Trending Topics
#9
Honda-Tech Member
Join Date: Jun 2001
Location: Cincinnati, Ohio, United States
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
Re: Optimal Tire Pressure for Azenis? (hooptie157)
I was running 37f/35r for my last auto-x, but I found that I was scrubbing the edges quite a bit, so for my next auto-x I'm going to up the pressure to maybe around 42 or so.
Jon
Jon
#11
New User
Join Date: Aug 2001
Location: So Cal, CA, USA
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
Re: Optimal Tire Pressure for Azenis? (JDMb18civic)
i'll be the first to refer you to the search as i've asked this exact same question before.... seems like around factory specs are good for the street, higher in the front and lower in the back but then again the amount of suspension work you've done will determine your best settings, if you have easy access to an aircompressor try keeping a long and use the various pressures you try as an excuse to drive. Although you didn't ask about auto-x i've researched this topic as i dabble in auto-x w/ my azenis and i've found that LOWER pressure in the back, 29-30, works great with no scrubing thanks to the super stiff sidewalls and allows, for itrs atleast, good rotation and a larger contact patch. Although most everyone swears that if you auto-x you must run higher psi i've yet to hear of anyone trying a lower pressure in the back on the azenis and not being happy. For those reccomending the higher psi in the back for auto-x on azenis i'd be interested to see if you'd like to try out the lower psi at your next auto-x and come back and share your opinions with us. -rob
Thread
Thread Starter
Forum
Replies
Last Post
Safe Drives
Wheels, Tires, Brakes, and Suspension
16
09-26-2006 02:30 PM